bing tracking image

Curt Wiring - Trailer Connectors - C58044 Review

content loading

Customers compare C58044 to these similar products




Products Featured in this Video



Review of Curt Wiring C58044


Today we're going to review part number C58044. This is the Curt vehicle wiring harness with the 4-way flat trailer connector. This part does come with these quick splice connectors also. This a 4-way flat trailer connector at the back of your vehicle, this is the vehicle end. Powers your trailer's signal lights, it has a nice rubber molded connector and it uses a bonded wire to provide maximum durability. It is a very simple installation. As you can see right here on this end it has the pigtails.

Basically it's hard wired to your existing wiring. You just include these quick splice connectors for easy splicing of these wires. They do give you three of them for three wires, the white wire is a ground so that you do have to connect to a good clean ground. Again the application on this is for vehicles with the two wire lighting systems. The length of this wiring is 60 inches. The wire gauge that they use in them is 14 gauge and the configuration basically if you'll notice the green wire is the right turn and brake lights, the yellow is the left turn and brake lights, the brown is the tail lights and the white is the ground, which is the standard wire colors in a 4-way. That should do it for the review on part number C58044.

This is the Curt vehicle wiring harness with the 4-way flat trailer connector. .


Questions and Comments about this Video

Info for this part was:

Employee Sue W
Video Edited:
Sue W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.