bing tracking image

Demco Fifth Wheel Installation Kit DM6200 Review

content loading

Customers compare DM6200 to these similar products

Products Featured in this Video

Review of Demco RV Accessories and Parts DM6200

Speaker 1: Today I'm going to take a look at the Dem Co. fifth wheel rail adaptor for the Nissan Titian, OEM fifth wheel towing prep package. And this has a 21,000 pound weight capacity. This is a custom fit part, it is designed to fit the 2017 and newer Nissan Titan XD trucks with the eight-foot bed and the factory under bed rail kit. Basically, this part here will convert your factory installed under bed fifth wheel mounting kit for Nissan to the standard above bed fifth wheel base rails. So it'll let you use most of your fifth wheel trailer hitches that attach to the standard above bed rails.The way this installs, basically, it mounts right here there's two pins.

This will mount to the two OEM pucks and then right in the middle there's a shaft here, this will go into the gooseneck inaudible 00:00:43 hole in the truck bed. So once this whole unit drops into the pucks and then it'll lock into the gooseneck inaudible 00:00:48 hole using this locking inaudible 00:00:50 plate right here. It uses a ball bearing locking system. So right now the ball bearings are in and when you turn this it'll lock the into place and then you just take the thumb screw. Go ahead and tighten it all the way down and once it's tightened all the way down, that'll prevent it from being removed from the gooseneck inaudible 00:01:07 hold.

There is no drilling or welding required. This is a steel construction with a nice rust resistant black powder coat finish to it. And part is made in the USA. Again, the specs on this, the application is for the Nissan Titian XD trucks with the OEM under bed base rails and this has a maximum capacity for 21,000 pounds.But that should do it for the review on the Dem Co. fifth wheel rail adaptor for the Nissan Titian, OEM fifth wheel towing prep package.

And a 21,000 pound weight capacity.

Questions and Comments about this Video

Will this adapter work with a 2700 series pullrite slider hitch?
Etrailer Expert
Reply from Jon G.

Yup! It will work just fine.

Brian C.
Can I use this Demco plate on my 2020 Titan XD with my Reese Hitch...Reese 30047 16K Fifth Wheel....Thanks for your time
Etrailer Expert
Reply from Jon G.

The Demco Adapter # DM6200 will fit your 2020 Nissan Titan XD and is compatible with the Reese 5th Wheel Hitch # RP30047 . With that being said, your Reese hitch is a stationary hitch that we recommend using for trucks that have a long 8' bed to ensure that you have enough trailer-to-cab clearance. Since you have a 6-1/2' bed I recommend going with a sliding 5th wheel hitch like the Hijacker Autoslide # DM8550034 so that you know that you have enough clearance.

Reply from Brian C.

@JonG I have a Turning Point head on my 5th wheel that's activated. That should alleviate me needing a slider hitch?

Etrailer Expert
Reply from Jon G.

@BrianC In that case you're good! The Turning Point moves your pivot point back 22" so you'll be good on clearance. If you don't already have a custom wedge then you'll want to go with the kit # SWW-03 . This will fit the funnel on your 5th wheel hitch much better than the universal wedge that comes on your Turning Point pin box.

Reply from Brian C.

@JonG Thank you very much

Etrailer Expert
Reply from Jon G.

@BrianC Anytime!

Robert W.
He says it fits 8 ft bed will it work on my 6.5 ft bed?
Etrailer Expert
Reply from Chris R.

Yep, the adapter will fit your 6-1/2 foot bed as well.

Info for this part was:

Employee Jeff D
Installed by:
Jeff D

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.