Derale Transmission Coolers - Remote Cooler - D13760 Review

content loading

Customers compare D13760 to these similar products




Products Featured in this Video



Review of Derale Transmission Coolers D13760


Speaker 1: Today, we're gonna take a look at the Derale Hyper Cool Remote Cooler Assembly with the fan. Now, this part will improve performance and overall functioning of your engine or transmission.It has the super-efficient stacked plate cooler core for optimum heat transfer. This is the most efficient cooling system with a large surface area of a stacked plate design and turbulator technology. It does use the furnace brazed aluminum construction for great heat dissipation.On the other side, you can see, here, it offers superior air flow with this 500 cubic feet per minute reversible electric Tornado fan. This fan is reversible. It comes out of the box set up as a puller fan.

If you need to reverse it to a pusher fan, you can just remove the clip, flip the fan the other way, and then put it back together. It's pretty simple to do.This is designed with a clear anodized aluminum shroud for additional durability. It is designed to mount anywhere with these aluminum mounting brackets.Now, this part will include everything shown, here, on the table: the complete cooler assembly, the aluminum male ANN fittings, and the three-eighths inch hose bar adapters that you just screw on there. Then apply these to the -6ANN fittings on there, adapts it to the three-eighths inch hose bar.Now, these parts are made in the USA. The inlets on here are -6ANN.

The adapters we've mentioned that it comes with are -6ANN to a three-eighths inch hose bar. The distance between these inlets center to center, we put a ruler on that, you can see it's gonna be right at 10 inches. The mounting dimensions, these holes, here, where you'll mount 'em, the width center to center is right at seven-and-a-half inches, and the height, center to center, is gonna be right at nine inches.Now, the overall dimension of this cooler is gonna be 13 inches wide, 10 inches tall, and about five and five-eighths inches deep.That should do it for the review on the Derale Hyper Cool Remote Cooler Assembly with the fan.


Questions and Comments about this Video

Terry B.

can this be use for engine coolant

Etrailer Expert
Reply from Rachael H.

Yes, this cooler can be used a remote engine cooler, but is not a high enough capacity to function as the primary radiator and fan combo for cooling your vehicle's engine.

Info for this part was:

Employee Jeff D
Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.