Review of Derale Transmission Coolers - Frame Rail Cooler - D13254

content loading

Customers compare D13254 to these similar products

Products Featured in this Video

Derale Transmission Coolers - Frame Rail Cooler - D13254 Review

Hello everybody. This is Jeff at etrailer com. Today. We're going to take a look at this to Derale 17 inch long single pass aluminum heat sink transmission cooler with the installation kit. Now this part will extend the life and improve your functioning of the transmission on your vehicle. It is a nice all aluminum design for high heat transfer and it will absorb and then dissipate the heat effectively using both the internal and the external aluminum fins does have a nice compact three inch diameter housing which makes it capable of fitting most frame rails.

And it does use removable brackets on each end that allow you the cooler to be clocked. This kit comes with a complete transmission cooler hardware kit to easily install on to vehicles with a five 16th inch diameter transmission cooler lines. It does include the rubber hose with the stainless steel clamps, all the adaptor fittings. All the mounting hardware. Nice set of detailed instructions.

That'll describe how it installs few specs on this. On the very end the inlets are half inch diameter, NPT size inlets. The overall dimension, including the mounting brackets. If we measure from end to end that's right at 17 and a quarter inches long the width at the very end is right at two and three sixteenths inches wide. And the overall height when this is mounted from the bottom to the very top is three and a quarter inches tall.

Now the mounting dimensions, if we've measured where the mounting brackets are and the mounting holes center to center. So if we go across center to center, it's right at 16 and five eighths inches long, and the width center to center and the width on the mounting holes is one and three eights inches wide but that should do it for the review on this Derale 17 inch long single pass aluminum heat sink transmission cooler, with the installation kit..

Questions and Comments about this Video

Info for this part was:

Employee Jeff D
Installed by:
Jeff D

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.