bing tracking image

Dexstar Tires and Wheels - Wheel Only - AM20395 Review

content loading

Customers compare AM20395 to these similar products




Products Featured in this Video



Review of Dexstar Tires and Wheels AM20395


Today I'm going to review part # AM20395, this is the Dexstar Vintage 15 inch x 5 inch Steel Trailer Wheel with the 4 on 9.44 bolt pattern and a 1/2 inch positive offset in silver and color. This wheel is a sturdy steel construction. They use a nice silver pwoder coat finish over an e coat primer on the front and back of the wheel. This gives you excellent corrosion resistance. This is a vintage design; has the star pattern to it. It does have the 1/2 inch positive offset to ensure that he wheels position closer to the trailer frame basically on the offset most trailer wheels, this mounting surface that goes up against the hub on your trailer is usually positioned right at the center line of the wheel.

On some wheels they do give an offset to have them clear brakes or something from underneath the trailer. In this one they moved this mounting surface a 1/2 an inch positive, which means to the outside, which in turn will pull the tire and wheel closer to the trailer frame. This is a high quality wheel; does meet the Department of Transportation specifications. It is made in the USA. A few specs on this. The dimension is 15 inches in diameter and 5 inches wide.

When you do measure that you want to make sure your measuring inside the inside where the tire beads would seat. The same on the width, inside to inside because what your measuring on the dimensions is when the tire is seated on here the beads seat right here so that's what should be measures. The diameter is going to measure inside to inside. Let's put a ruler on that. If you go inside to inside you'll see 15 inches for the diameter.

The width again inside to inside. You'll see 5 inches. Now the bolt pattern; this is a vintage bolt pattern. It's a very large bolt pattern. You can see the four holes. On a wheel that has an even number of holes, in this case four, you just measure from the center of one hole directly across to the center of the hole right across from it.

On this one, if we put a ruler on it, you will see it gives you the 9.44 bolt pattern. This does use a wheel lug size of a 1/2 inch x 20. The load range is 1,680 lb. Again, just to mention it does use a 1/2 inch positive offset which moves this mounting surface 1/2 inch to the outside of the wheel which in turn makes the wheel move closer to the trailer frame. That should do it for review part # AM20395, the Dexstar Vintage 15 inch x 5 inch Steel Trailer Wheel with the 4 on 9.44 bolt pattern, 1/2 inch positive offset in silver and color. .


Info for this part was:

Employee Jeff D
Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.