bing tracking image

Dexstar Tires and Wheels - Wheel Only - AM20545 Review

content loading

Customers compare AM20545 to these similar products




Products Featured in this Video



Review of Dexstar Tires and Wheels AM20545


Today we're going to review part number AM20545, this is the Dexstar 15" by 6" Black Steel Mini Mod Trailer Wheel with the 5 on 4 1/2" bolt pattern. This steel wheel has the modular design, or the mini mod design, and by that they mean it has the round holes all the way around. It's very sturdy, very corrosion resistant. Does use a two step finishing process on the wheel, what they basically do is first put an eco-primer down and then a black powder coat finish over the front and even the back of the wheel. This wheel does meet the Department of Transportation standards, it is made in the USA. On the specs on this wheel, the rim dimensions, the diameter is 15" and it's measured inside the inside and the width is also 6" wide, inside to inside.

When you go to measure this, you're going to be measuring when a tire is seated on here, the beads of the tire seat right in here, so that's what you'll be measuring. When we do the diameter it's going to be inside to inside, so if I take a tape measure here and if we put it on that diameter, you'll be able to see it's right at 15" diameter, the width again, is going to be inside to inside, so if we put a tape measure on that, right at 6", so 15" by 6". The bolt pattern on this wheel, it's a 5 lug 4 1/2" bolt pattern and on a wheel that uses an odd number of lugs, in this case five, the way to measure the bolt pattern is you just pick one of the holes, and then measure directly across to either hole right across from it. You can measure from this hole to this one, or this to this. The trick is to get the correct measurement, you need to measure from the starting hole center, to the outer edge of the hole that you got to. If we go from this hole to this hole, try to show you, we'll go center to outer edge, and see it's right at 4 1/2", so 5 on 4 1/2" bolt pattern.

It does use a wheel lug size of 1/2" by 20. This does have a weight capacity of 2,150 pounds and the pilot hole diameter, which is the large hole here in the center of the wheel, this goes over the hub on your trailer, diameter of that opening is going to be right at 3.19". That should do it for the review on part number AM20545, this is the Dexstar 15" by 6" Black Steel Mini Mod Trailer Wheel with the 5 on 4 1/2" bolt pattern.


Info for this part was:

Employee Jeff D
Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.