bing tracking image

Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 84556UC3 Review

content loading

Customers compare 84556UC3 to these similar products




Products Featured in this Video



Review of Dexter Axle Trailer Hubs and Drums 84556UC3


Speaker 1: Today we're gonna take a look at the Dexter complete trailer hub and drum assembly for hydraulic brakes on a 3500 pound axle, and this has the five on five-inch bolt pattern. This hub and drum assembly will include everything shown here: the hub and drum itself, both the inner and outer bearings. Now the bearing races are included. They are pre-installed in the hub right there. Grease seal, the grease cap, the wheel studs are installed in the hubs, and then the lug nuts. All that's included.This is designed for use with the 10-inch by 2 1/4-inch hydraulic brake assembly.

Application again is 3500 pound axles with the number 84 spindle. A few dimensions on this drum, I wanna measure the inside diameter. It's gonna be 10 inches. The width on it is right at 2 1/2 inches. The bolt pattern again on this is a five on five-inch bolt pattern.

Now the inner bearing it uses is a part number L68149, it has an inner diameter of 1.378. It would go right in the bearing race just like that. Now the outer bearing number is the L44649. Has an inner diameter of 1.063. Goes on the outer bearing race just like that.Now the double lip seal, it's a double lip grease seal that it comes with.

It's part number 10-19. Has an inner diameter of 1.719, outer diameter of 2.565. That would go in the rear right after you put your bearing in there, then you put your grease seal in there. And then the grease cap. The grease cap is a 1.986 outer diameter, and that would go over the outer bearing once you install that, taps in just like that.Now the wheel stud size that's on this is a half-inch by 20, and it does come with 5 1/2 inch by 20 lug nuts.

But that should do it for the review on the Dexter complete trailer hub and drum assembly for hydraulic brakes on 3500 pound axles with the five on five inch bolt pattern.


Info for this part was:

Employee Zack K
Video Edited:
Zack K
Employee Patrick B
Installed by:
Patrick B
Employee Jeff D
Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.