bing tracking image

Review of Dexter Axle Trailer Hubs and Drums - Hub - DA54FR

content loading

Dexter Axle Trailer Hubs and Drums - Hub - DA54FR Review

Ellen: Hey, everyone. I'm Ellen, here at, and today, we're going to be taking a look at the Dexter Axle. This is going to be an idler hub for your axle face, so it replaces any kind of worn out component that you might already have, it gives you a new axle face to attach your wheel to the axle.So it's going to be an e-coating there to resist any kind of rust and corrosion. As far as the application this will work for, it works for trailers with a 2100 pound axle capacity or 2,100 pounds. The bolt pattern is going to be five on four and a half, so if we go from one of those bolts to the exact opposite side, that's going to measure four and a half inches. That gives us five on four and a half and then this is going to have a half inch bolt design with a weight capacity of a thousand pounds.All the bearings, races and seals, those are going to be sold separately.

The race is actually the only thing that is included with this and are already installed, but the seal and bearings will be available separately. You can find those right here at using the part numbers on the product page as well.Can see on the other side. That'll be our inner race there. So that's where our bearings ride along and it's going to make sure that everything flows smoothly for this. But that's pretty much going to do it for our look at the Dexter UFP idler hub.

I hope this video has been helpful in deciding if this is going to be the right piece for you. If not, we do have other configurations available. Thanks for watching.