bing tracking image

Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 8-201-9UC3-EZ Review

content loading

Customers compare 8-201-9UC3-EZ to these similar products




Products Featured in this Video



Review of Dexter Trailer Hubs and Drums 8-201-9UC3-EZ


Today, we're going to take a quick look at Dexter Axles, Trailer Hub and Drum Assembly, part number 8-201-9UC3-EZ. This drum is designed to work on 5200 and 6000-pound axles. The drum's capacity itself is 3000 pounds so when you pair it up with another drum on the other side of the axle, you'll get your 6000 pounds total capacity. Included with this drum are all the parts that you'll need to mount it to your axle. The races are already pressed inside the hub bore. You also have your bearings.

The inner bearing is 25580 and the outer bearing is 15123. You have a grease cap with a 2.44-inch outer diameter and a removable rubber plug so that you can access the grease zerk on your EZ lube spindle. There are also six conical lug nuts for securing the wheel to the drum and your grease seal. The hub and drum assembly has a 6 on 5-1/2 bolt pattern. There are six lugs or six studs and if we're able to accurately measure across from one stud directly across to the other, we get our 5-1/2-inch measurement.

Now, we'll take a look inside the drum and take a couple of measurements. Our depth measures in at about 2-1/4 inches. Our diameter across the inside is 12 inches, which means that this drum should be used with 12-inch by 2-inch brake assemblies. And that's it for our quick look at Dexter Axles, Trailer Hub and Drum Assembly, part number 8-201-9UC3-EZ.


Info for this part was:

Employee Patrick B
Installed by:
Patrick B
Employee Joshua S
Video Edited:
Joshua S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.