bing tracking image

Redline Trailer Hubs and Drums - Hub - AH15450ECOMP Review

content loading

Customers compare AH15450ECOMP to these similar products

Products Featured in this Video

Review of Dexter Trailer Hubs and Drums AH15450ECOMP

Today, we're going to review part number AH15450ECOMP. This is a Dexter Agricultural Trailer Hub Assembly for a 3000-pound axle. This trailer hub has a capacity of 1500 pounds. When used with another hub on this other side of the axle would give you the maximum of 3000 pounds. This is designed for use with a spindle, part number AS1500E. Now, this part does come with the grease cap.

It does come with the 1-1/2-inch inside diameter grease seal. It comes with the inner bearing, part number LM67048. It comes with the outer bearing, part number LM11949 and it comes with four of the 1/2-inch wheel bolt to attach the wheel to the hub. Now, agricultural hubs like this and agricultural spindles are used mostly in building or repairing implement wagons, carts, or machinery. The agricultural hubs and spindles are designed for low-speed applications, the weight capacity shown for speeds not to exceed 20 miles per hours.

Now, this agricultural hub has a bolt pattern of 4 on 5-inch bolt pattern. So basically, the way you would measure that is on a bolt pattern that has an even number of lugs. It would be, in this case, four. You just measure directly from the center of one hole directly across to the center of the other hole. So in this case, if we go across from center to center, it would be 5 inches.

So this will be a four-lug, 5-inch bolt pattern. And that should do it for review on part number AH15450ECOMP.

Info for this part was:

Employee Jeff D
Installed by:
Jeff D

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.