bing tracking image

Draw-Tite Ball Mounts - Adjustable Ball Mount - 7390 Review

content loading

Customers compare 7390 to these similar products




Products Featured in this Video



Review of Draw-Tite Ball Mounts 7390


Today we're going to review part number 7390, this is the draw tight, adjustable, hollow shank ball mount with the sway control tab and a six thousand pound weight capacity. This part is rated at six thousand pounds gross towing weight capacity and up to six hundred pounds tongue weight capacity. It does include this two inch by two inch square hollow shank and this shank has the holes going up and down on it. It is an adjustable shank that can be used in either the drop position like this, or if you flip it over, it can be used in the rise position. The ball platform, this is where your hitch ball would be attached and this is where your ball for your sway control would be attached that basically would slide up and down on there and these holes for the adjustment are at one inch increments, so just like that. That's in the rise position and I had mentioned you can also put it in the drop position and you can do the same thing when you put the bolt .. it comes with the bolts and the lock nut, so same way.

You can do it up and down in the drop position and the other nice thing is that this platform, you can use it for left or right hand sway control attachments. You can put it on this way, or you can flip it the other way and put it on this way. This does require the ball platform has a one inch diameter hole so it does require a hitch ball with a one inch shank diameter. We do sell those on our website separately. The thickness on this platform is five eighths of an inch thick. I want to give you an idea, and again, this comes with the hardware, I'm going to put it at the lowest position so the maximum drop position.

Basically what you would do is go ahead and just put it on the lowest. There we go, put the bolt through, put the other bolt through and then you would put your lock nuts on there but I'm going to try to give you measurements. This is in the maximum drop position, so the drop I'll measure from the top of the ball platform to the top of the shank. If we put a ruler on that, you can see it's going to be right at five and a quarter inch maximum drop. If we change this around, I'm going to put it in the maximum rise position. That would be flipping it around this way and we'll put it all the way up here.

Let's go ahead and drop it in. There we go. Now it's in the maximum rise position and again, it's measured from top of the shank to top of the ball platform. If we do that, you're going to see it's right at three and three quarter inches in the maximum rise position. That should do it for the review on part number 7390, the draw tight, adjustable hollow shank ball mount with the sway control tab and a six thousand pound weight capacity.

.


Info for this part was:

Employee Jeff D
Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.