bing tracking image

Dutton-Lainson Spare Tire Carrier - Frame Mount - DL22128 Review

content loading

Customers compare DL22128 to these similar products




Products Featured in this Video



Review of Dutton-Lainson Trailer Cargo Control DL22128


Today we're going to be taking a look at part number DL22128. This is the Dutton-Lainson Trailer Spare Tire Carrier. It's going to give you plenty of length. The actual length is going to allow handling of wide tires or spans that are going to be wider than tongues of custom built trailers. This is designed to fit four or five hole rims. When used with a 5 on 5 bolt pattern the bracket can be bent, that's just spreading it a little bit more in order to get it to fit correctly. Steel construction with a nice zinc TUFFPLATE finish.

It's going to stand up really well against rust and corrosion. A few measurements to go over with you real quick. The overall length measuring from edge to edge, that's going to give us a measurement of 8-5/8". If we take a measurement of the width, measuring inside to inside here at the widest point, that's going to give us a measurement of 3-5/8". At the lowest, narrow point, inside edge to inside edge, that's going to measure 3-1/8". That's going to allow you to know what size frame trailer this is going to fit.

It's going to work really well with trailer frames or bars that are going to be 3" wide. Again here at the narrow point you're going to have 3-1/8" to work with inside edge to inside edge. The bolts here on the ends, these are going to give us a diameter of 7/16". They're going to be separated center on center by 4-1/8". The nuts are included. It's really simple installation.

All you have to do is place this around the frame of your trailer. Place your wheel on here, making sure that the threaded portion comes through the lug holes on the wheel. Then you simply take the included nuts and you get those tightened down all the way, so that way it's pressing your wheel firmly against the frame of the trailer for a nice secure hold, especially during travel. Once you have it all the way tightened down you'll be set and ready to go. Keep in mind this does not include a lock. We do offer some spare tire locks that can go over the threaded portion.

Those are available here on our website. They are sold separately. This system is going to work with 8", 9" or 12" wheels and Dutton-Lainson is going to make it in the U.S.A. That's going to do it for our review of part number DL22128. This is the Dutton-Lainson Trailer Spare Tire Carrier. .


Info for this part was:

Employee Andrew K
Installed by:
Andrew K
Employee Cole B
Installed by:
Cole B
Employee Jacob T
Video Edited:
Jacob T
Employee Aidan B
Video by:
Aidan B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.