bing tracking image

Review of Erickson ATV-UTV Tie Downs - 4 E-Track Ratchet Straps and Wheel Chock Tie-Downs - EM98CV

content loading

Customers compare EM98CV to these similar products




Products Featured in this Video



Erickson ATV-UTV Tie Downs - 4 E-Track Ratchet Straps and Wheel Chock Tie-Downs - EM98CV Review


Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Erickson ATV E-Track tie-down kit. This kit is going to secure your ATV, lawnmower, or other wheeled equipment into your trailer. It's going to provide wheel chocks and tie-down straps that will hold all four of your ATV or other wheeled equipment wheels steady in place. You can see, we are going to have these yellow powder-coated wheel chocks that will permanently install in the bed of your trailer. These chocks are positioned in front and behind each wheel to stabilize your equipment.

This is gonna be a very easy bolt on installation. You can see we've got several different mounting holes there. The mounting hardware is not included. You will have to provide that yourself, but it is gonna be very easy to just get a few bolts put through each chock and be ready to go with that side of it. Each chock has these two E-Track anchor slots to accommodate different wheel sizes.

Our ratcheting straps have the E-Track fitting that's going to snap into place. So we'll just lift up on the one side, slide it in and it will snap in place there and have a nice secure fit. These straps are two inches wide by seven and a half feet long polyester webbing straps. So they're gonna hold up really well. They're gonna fit wheels that are 10 to 13 inches in diameter.

Each strap is going to have a safe working load limit of 1,500 pounds and a maximum load or break strength of 4,500 pounds. So you wanna make sure that you're keeping that in mind when you're deciding what equipment you'll be able to haul with this. The straps do have these sturdy ratchets that help to achieve maximum tension on your straps. So you're gonna be able to tighten that down, make sure that there's gonna be plenty of tension on your wheels. And then when you're ready to unload, just lift up on that little latch there and it unhooks.

So really nice option here having four straps and the eight wheel chocks to make sure that all four wheels of your vehicle are gonna be held in place. So that's gonna complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..


Questions and Comments about this Video


Scott W.
Do you need any special spacers to mount onto aluminum trailer deck? Thanks
Etrailer Expert
Reply from David B.

I would use some neoprene spacers and steel bolts(stainless) This will slow down any galvanic corrosion. Due to the size of the units you will not have any major reactions or concerns of structural integrity.

Info for this part was:

Employee Michael B
Installed by:
Michael B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.