Fantastic Vent RV Vents and Fans FVK8017-00 Review

content loading

Customers compare FVK8017-00 to these similar products




Products Featured in this Video



Review of Fantastic Vent Accessories and Parts FVK8017-00


Speaker 1: Today we're going to be taking a look at the replacement fan motor assembly kit for Fantastic Vent Roof Vent Fans. This is going to replace that original vent fan that came with your Fantastic Vent Roof Fan. It's going to have al the same specs as that. It does have the motor already attached with the bowtie bracket on the back. You'll just need to secure that in place on your vent with the screws that came with your kit. There is no hardware that comes with this, so you will have to replace either with the original hardware or pick up some on your own.Has the two wires for your power and ground hookup.

They already come with butt connectors on them, so that's one last step you have to do. This does have to be connected to 12 volt power. As far as the measurements for this fan, from the mounting hole on either side of the bowtie bracket, center on center, that's going to be 11 and a 16th inches from the height of the mounting holes themselves, that's going to be five and 5/16th inches. From the inside edge to inside edge of that bracket, that's going to be 12 and 5/8ths. You can see a little bit better if I hold it in front maybe.

The fan diameter itself, that is going to be 11 and 3/8ths, so that gives you an idea of what that should bit, but it will work with the Fantastic Vent Roof Vans. You can check those part numbers out on our website. This will be a direct replacement from Fantastic Fans, so it should work out well.That's going to do it for our look at the replacement fan motor assembly kit for Fantastic Vent Roof Fans.


Questions and Comments about this Video

Dave S.

Does the vent fan motor assembly need to be replaced from the roof or can it be done from inside the coach?

Etrailer Expert
Reply from Jon G.

You will need to be able to get on your roof to install the Replacement Fan Motor Assembly Kit # FVK8017-00 . You actually secure it from the top and there is no way to install the screws from below.

Info for this part was:

Employee Kathleen M
Installed by:
Kathleen M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.