Customers compare SWW-06 to these similar products
Products Featured in this Video
Today we are going to review part number SWW-06. This is the 5th Airborne Custom Wedge for B & W Fifth Wheels. Now this wedge is designed to work with the Sidewinder and 5th Airborne Sidewinder pin boxes. This will replace the universal wedge that comes with the Sidewinder and the 5th Airborne Sidewinder. It is a custom wedge. It is designed specifically to fit the B & W hitches. It's made for the… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
A wedge is needed, yes, and the Lippert Turning Point pin box does come with a universal wedge, but it is not a very good fit with the B&W Companion #BWRVK3710. So I highly recommend instead using the 5th Airborne Custom Wedge for B&W Fifth…
view full answer...If you are having trouble fitting the wedge that came with your Lippert Turning Point pin box to your 18K B&W Patriot #BWRVK3255 then you can use the Custom Wedge #SWW-06 instead. This is actually designed for use with the Reese Sidewinder pin…
view full answer...There are a couple of options that'll work great with your Lippert Turning Point Pin Box, however one hitch stands out to me more than others. Take a look at the: -Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs #C16115 This 5th…
view full answer...Hello again, Neil. The B&W Patriot 5th Wheel Trailer Hitch #BWRVK3200 weighs about 150 lbs. The head unit weighs 50 lbs and the base is just under 100 lbs.
view full answer...Because your trailer has a Turning Point pin box and your Ram has a 6.5' bed I do recommend going with a fixed hitch and using the Turning Point as a rotating pin box to give yourself enough turning clearance. With you also having a puck system…
view full answer...I was able to pull up the online towing specs for your 2018 Ford F-150 and it looks like there is still a somewhat large potential range even within the specs that you provided depending on your axle ratio, drivetrain, and wheelbase. At the low end…
view full answer...The universal wedge of your Lippert Turning Point will work with the B&W Patriot 5th Wheel Trailer Hitch #BWRVK3200. That said I do recommend using a custom wedge for a better fit, the Custom Wedge for B&W Fifth Wheels #SWW-06; we have had a…
view full answer...The Replacement Wedge Block for Lippert Turning Point Pin Box #LC79UD is a universal wedge that has been confirmed to fit both the Lippert Turning Point pin boxes and B&W fifth wheel hitches. If you bought a trailer secondhand and didn't have…
view full answer...The shipping weight of the Curt cargo carrier part #C18151 that you referenced is 58 lbs so when you take out the weight of packing material you'd have a carrier that weighs 55 lbs. The weight capacity of the carrier is 500 lbs.
view full answer...Since your 2017 GMC Sierra 1500 Denali with MagneRide suspension has a 5-1/2' bed you'll have to use a sidewinder pin box to help prevent the nose of your 5th wheel from coming into contact with the cab of your truck. Pin boxes have specific…
view full answer...Congrats on all your new toys! I do not think a Curt 5th wheel hitch, like item #C16120, is the best for your set up. You would need to purchase an adapter rail item #C88KR to use this hitch with your puck system. This adds weight, cost, and…
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
view full answer...