Flex-a-lite Transmission Coolers - Tube-Fin Cooler - FLX4118 Review

content loading

Review of Flex-a-lite Transmission Coolers FLX4118


So, I'm going to take a look at the Flex-a-lite Translife transmission cooler kit with the 3/8 inch barbed fittings and a Class 3 rating. Now, this Translife transmission cooler kit will provide additional cooling to protect your automatic transmission. This cooler transmission oil will give you more reliable consistent shifts and it prevents transmission damage under extreme towing conditions. Now this kit will include everything shown here on the table, the transmission cooler, the 4 feet of rubber hose, the hose clamps, the male and female hose adapters, all the mounting hardware and a nice set of detailed installation instructions. And on the cooler itself, the tubing, the brass tubing is .5 inch diameter tubing. On the inside of the tubing, they actually do a high twist turbulator design. Basically what that does is that allows the fluid on the inside of these tubes as it's moving along, it actually twists and that improves the heat transfer.

You'll notice the inlet and outlet, they do have the 3/8 inch barbed fittings on them. Now this is a 6-pass configuration and you can see how many times the fluid goes through the heat exchanger, 1, 2, 3, 4, 5, 6. And the construction, this is an aerospace epoxy construction on the cooler and it is a Class 3 rating. I do want to give you some dimensions on this. The overall width from the edge to the edge of the other tube is going to be right at 15 inches. The height from the very bottom to the very top is right at 7.5 inches tall.

And the depth on it is .75 inch deep. But that should do it for the review on the Flex-a-lite Translife transmission cooler kit with the 3/8 inch barbed fittings and a Class 3 rating.


Questions and Comments about this Video