Flex-a-lite Transmission Coolers - Tube-Fin Cooler - FLX4120-6 Review

content loading

Review of Flex-a-lite Transmission Coolers FLX4120-6


Today, we're going to take a look at the Flex-a-lite TransLife direct fit Tube & Fin Transmission Coolers. Now, this is a TransLife Transmission Cooler kit that will provide additional cooling to protect your transmission. A transmission cooler can reduce the transmission oil temperature by as much as 30%, and then cooler transmission oil, of course, will give you more reliable, consistent shifts. Under any extreme towing conditions, it will help prevent transmission damage. Now, this is designed to mount in front of the radiator, the air condition, or condenser. Inside the tubes that the oil flows through they do have turbulators and that helps circulate the oil, gives a superior heat transfer. This one is a six pass configuration, and that's because the tube will go or the oil will go in the tube six times through the condenser here.

One, two, three, four, five, and then six. Again, the tube diameter is a half an inch. On this one, if you'll notice on both the inlet and the outlet that you do use a number six ANN fitting. This kit does include everything shown here on the table, the transmission cooler itself, the cooler mount kit, which includes the nylon bolts, the washers, rubber spacers, and the push nuts, and a nice set of detailed instruction describing how to install everything. The last thing I want to do is give you some dimensions on the cooler itself. The overall width on it, and we're going to measure from the end to the other end of the tube here. It's going to be right there at 20 inches.

The height on it measured from the very bottom to the very top is going to be right at seven-and-a-half inches tall. Then the depth of it is right at three-quarter inches deep. That should do it for the review on the Flex-a-lite TransLife direct fit Tube & Fin Transmission Cooler.


Questions and Comments about this Video