Furrion RV Camera FRCBRKT-BL Review Video

Since your trailer has the bracket #FRCBRKT-BL that would mean your trailer has the Furrion pre-wiring which is very common for newer RVs. The part #FOS43TASF is a fit for this and would be a really easy install. This gives you a monitor with a 4.3…

The #FRCBRKT-BL that you have on your camper indicates you have a Furrion Vision S system so you have a few options for monitors that will work with what you have. -Replacement 4.3" Monitor for Furrion Vision S Wireless RV Camera System #FR77FR…

Based on the sharkfin camera mount in the picture you provided I can tell you that your 2021 Amerilite 189DD was prewired for Furrion cameras #FRCBRKT-BL. Because of this you won't be able to find an adapter but can cut the plug-in off of the…

That is exactly what the adapter was designed to do. The Furrion #FR87PR is designed to provide the proper amount of voltage on the running lamp circuit of the 7-way so a camera system will receive enough power to operate reliably. Ford and GM 2019…

Since the Loadstar K399 Bias Trailer Tire #AM1HP54 has a load rating "D" and a ply rating of 8, the recommended PSI for the tire is 70.

It would seem that the 1,750 rating that your tire has is the weight rating, but most ST205/75-14 tires with a Load Range of C have a 1,870 lb capacity at 50 psi like part #AM10229. That would mean that when you combine the two tires you have an…

EZ Lube axles like the item #T3584F-EZ-8974 come from the factory with just a little bit of grease in the bearings. The first time you use the EZ Lube feature to fill the axle, it will take a lot of grease. You will probably use 3/4 to a full tube…

The Replacement Shark Fin Camera Mounting Bracket for Furrion Vision S RV Camera Systems - Black - Qty 1 #FRCBRKT-BL is the only way to get the Shark Fin Mount without replacing the entire camera.

While I don't know the exact functions of the wires on your trailer that you'll use to wire up the camera of the Furrion Vision S part #FOS07TASF that you have I can definitely help. You will need a circuit tester like the part #PTW2993 to…

The gooseneck adapter post on the B&W Companion Slider Gooseneck to 5th Wheel adapter #BWRVK3400 is not going to be able to be moved. I don't think there is a good reason aside from the fact that the designers likely assumed that there…

The Replacement Shark Fin Camera Mounting Bracket #FRCBRKT-BL mounting holes are 3-11/16" apart from center to center of the holes. The body of the mount where the camera goes is only 3-1/4" wide. With the way the body forms around the…

The only way we can get the cord that's in the Furrion bracket #FRCBRKT-BL is with the entire bracket.