bing tracking image

Gen-Y Hitch Hitch Fabrication Parts - Receiver Tube - 325-GH-003 Review

content loading

Customers compare 325-GH-003 to these similar products

Products Featured in this Video

Review of Gen-Y Hitch Hitch Accessories 325-GH-003

Speaker 1: Today we're taking a look at the Gen Y weld on receiver tube. Now this receiver tube allows you to fabricate your own receiver hitch. The opening, right here, is designed for two inch hitch accessories, so that opening measures two inches by two inches. And that features a reinforced 3/4 inch steel collar for added strength and durability.A few measurements I just want to take for you here. I want to go outer edge to outer edge, that's a square design, so whatever we get side to side will be the same up and down. So, edge to edge, this direction, you can see there's about three inches.

And then inside edge to inside edge is about two inches. Now, we're looking at a raw steel construction, so it's ready for welding.Product is made in the USA, and it has a capacity of 16,000 pounds. So that's the rated capacity for this unit. Now, please keep in mind that your capacity depends a lot on how it's installed, and what it's installed on, or what it's attached to. But this unit, itself, does feature a 16,000 pound rated capacity.

Then, when it comes to the overall length, measuring edge to edge, you can see here, that that measures about 12 inches long.The pin hole right here, will accept a standard 5/8 inch diameter hitch pin or hitch lock. That item is not included. Again, overall length about 12 inches. Now, I took a measurement from the center of the hitch pin hole to the front of the unit, and that was 2-1/2 inches. From the center of the hitch pin hole to the very back of the unit, was 9-1/2 inches.

That's going to do it for today's look at the Gen Y weld on receiver tube.

Info for this part was:

Employee Cole B
Installed by:
Cole B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.