Gen-Y Anti-Rattle Clamp for 2" Hitch Receivers Feature Review Video

We have just what you're looking for with the Gen-Y Anti-Rattle Clamp for 2" Hitch Receivers #GY88XR. The sleeve acts as a wedge to take out play between your hitch receiver and extender. Although it does not not require a wrench and a…

According to the online version of the owner's manual for your 2010 Honda Fit that we found you will need to remove the Radio fuse from the interior fuse block which is in the 61 position. This is where you will want to install the Roadmaster…

Yes, there is a way to secure the accessories to the Yakima EXO Swing Away Cargo Carrier item #Y72VR. The Swing Away base has Yakima's Same Key System (SKS) locks built in that secures the accessories to the base. These cores are included but can…

The ride on the back of a trailer is very rough due to the extended distance from the axle so a lot of hitch mounted accessories like the Flint Hill Goods 30x50 Wheelchair Carrier part #FHG99ZR are not rated for this. Instead, I recommend using the…

Yes, anytime you extend the connection point of a tow bar like the Blue Ox Avail part #BX7420 with a high-low adapter or dual hitch adapter you will need to extend the safety cables. For this, I recommend the Demco Safety Cable Extensions part…

It is very unlikely that the hitch pin hole on your Draw-Tite Trailer Hitch Receiver is worn causing the ball mount to slide back and forth. There is usually a little bit of play in the receiver tube opening with a ball mount and this can easily be…

The Timbren Trailer Suspension Enhancement System #TTRA1702 is 2-3/4" tall with no load on the spring. This particular system is designed to mount to the frame with the included bracket(see image) and when the suspension compresses the axle will…

You are right that hitch adapters do in fact reduce the tongue weight capacity of a hitch by 50 percent, so you have a really smart idea here with the Gen-Y Phantom X Ball Mount w/ Stacked Receivers for 2" Hitch - 6" Drop/4.5" Rise…

Not only does the Gen-Y Replacement Shank #325-GH-303 have the 10,000-lbs capacity (1500-lbs tongue weight) that you're looking for, it will provide you with a 5" rise or drop, depending on how you decide to use it. This hitch will work with…

As long as you do not exceed the tongue weight capacity of the #GY87VR it could handle your bike and bike rack. This has a tongue weight capacity of 700 lbs so it won't be a problem. However, if you think you might tow your popup camper and also…

The only Aluminum cargo carrier we currently carry close to 24" x 60" would be the 30x50 Curt Cargo Carrier #C18112. This cargo carrier only has a slight rise in the shank and comes with a 48-1/8" long folding ramp. The shank also…

Yes, I have recommend load extenders such as #EM07600 for cars, trucks, vans, and SUVs. Sometimes it is just the right tool for the job! Once installed in the hitch the minimum height is 16 inches. If you measure from the top of the receiver opening…