Customers compare 325-GH-1723 to these similar products
Products Featured in this Video
Hello, everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at this Gen-Y adjustable two-ball mount with the pintle lock and the six inch drop or rise for your three inch hitch, and this has a 32,000 pound gross towing weight capacity. Now, this is an adjustable ball mount that'll let you hook up your trailer to your tow vehicle. The shank right here is what'll slide into your… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The usable span of the Bolt Hitch Lock part #BL7023585 that you referenced is a little over 3-1/2 inches. If you check out the picture I attached you'll see all of the dimensions of the lock. This lock is intended for use with 2-1/2 inch…
view full answer...The Gen-Y Torsion 2-Ball Mount #325-GH-1824 that you referenced does now come with set screws on the sides of the square openings to allow the movement of the ball and retainer to be reduced. I attached a picture of them for you to check out. The…
view full answer...I have some great options that check all the boxes; 3" hitch, 2-5/16" hitch ball, 6" drop, and made in the USA. I have attached these for you below but bear in mind they are all adjustable. 180 Hitch 2-Ball Mount w/…
view full answer...The Tech at B&W says the hitch ball part #BWHB94004 should tightened to 120 ft lbs with a 2-15/16" wrench.
view full answer...Correct, there will need to be a small amount of wiggle room or play between the trailer coupler and hitch ball which is to allow the trailer to track and turn smoothly. If the connection point between the trailer coupler and hitch ball was too tight…
view full answer...We do offer a USA-made hitch ball with specs similar to the one you referenced. B and W offers their 2-5/16-inch hitch ball #BWHB94004. This has a gross weight capacity of 30,000-lbs, a 1-1/4-inch diameter shank that is 2-1/2-inches long, a fine…
view full answer...The price for the Gen-Y Adjustable Ball Mount with 6 inch drop for the three inch hitch size #325-GH-1723 is available at the link below.
view full answer...If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…
view full answer...I will start by saying the ARK Extreme Off-Road Ratcheting Trailer Jack w/ Wheel #ORJW1SU will fit frames that are 2" to 6" tall. The bolt hole measurements vary and I included a diagram with everything listed, but the overall dimensions of…
view full answer...The Bauer Products Motorhome Door Lock, #BA64FR fits doors that are 1-1/4" to 1-1/2" thick and requires a cutout dimension of 5-1/4" wide x 4-1/2" tall. Based on the measurements you provided and the attached images, yes, I think…
view full answer...All 2017 F-Super Duty vehicles equipped with a factory trailer brake controller (TBC) utilize a trailer module (TRM) which initiates the trailer charging system. For trailer charging to operate, the TRM must detect a trailer is connected and a brake…
view full answer...I'll start this out by saying that there is a B&W hitch with a 25000-lbs capacity that will fit in the OEM prep package on your 2017 Ford F-450, which is the B&W Companion OEM 5th Wheel Hitch for Ford Super Duty Prep Package - Dual Jaw -…
view full answer...