bing tracking image

Gustafson Lighting RV Lighting - Ceiling Light - 277-000343 Review

content loading

Customers compare 277-000343 to these similar products




Products Featured in this Video



Review of Gustafson Lighting RV Lighting 277-000343


Today, we're going to be taking a look at a 3 inch puck light. This LED puck light is going to be a great addition to your RV, camper, or enclosed trailer. It's a 12 volt 3 watt light. The housing and lens are made from a durable plastic construction and are white in color. The unit's going to contain 12 LEDs. You can pop that lens off.

That's going to allow you to gain access to the mounting holes. You can see all the LEDs in there. Now, LEDs are going to be great replacements for incandescent lights. They last longer, they burn brighter, and they're much more efficient. You don't have to worry about replacing bulbs or worry about brittle filaments. The unit is a 2 wire design.

Your white wire is for ground, black wire is for power. You can see, here, that it's going to contain 3 mounting holes. It is a recessed-mount installation, so a hole will need to be cut out for this area to go into. When we take a look at the mount hole spacing, if we take a measurement of the amount of distance we have between each hole, it's going to measure 2 1/4 inches apart on center. That's going to be the same between each mount hole.

Then, the lens just snaps back on. Now, when it comes to the dimensions of the base, just measuring the diameter, it's going to give us a measurement of about 2 1/8 inch. It's going to give us a depth, just the base, pretty close to 3/4 of an inch. The overall depth of the light is going to be about an 1 1/4. Overall diameter is going to measure pretty close to 3 1/2 inches. Now, the only part that will be visible when this is installed is from this flange area to the top of the lens, so you can see there, it's nice, low profile.

It's not going to stick out from the mounting surface very far at all, because it is a recessed-mount installation. Your mounting hardware is included. It's going to come with 3 mounting screws to get it installed. What we want to do now is simply just go ahead and hook it up to our power source, that way you can see what it looks like with power running to it. You can see here that the light sends out a really nice, consistent signal. It's a very bright light for being as small as it is. Again, the unit's going to contain 12 LEDs, so the multi-diode design is really going help optimize the light output. That's going to do it for today's look at the 3 inch puck light.


Info for this part was:

Employee Andrew K
Installed by:
Andrew K
Employee Cole B
Installed by:
Cole B
Employee Jacob T
Video Edited:
Jacob T
Employee Thomas T
Video by:
Thomas T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.