HappiJac Original Turnbuckles for Camper Tie-Downs Feature Review Video

Thanks for the kind words! Yes, the Custom Fit Tie Down Kit item #TL82FV does include both Front item #TLF2018 and Rear item #TLF3007 tie downs. These fit the 2018 Ford F-150 with a 6-1/2' bed.

Hey Michael, thanks for reaching out! The EcoHitch #EH57FR sits a little higher than the Curt #C52NR so it will give you better ground clearance for your 2024 Chevy Silverado 2500. The EcoHitch is a bit more recessed into the front bumper than the…

For an RV ladder that has a hinge half way up the ladder we have the Stromberg Carlson #LA-401 which would work well for you. The hinge allows the lower portion to fold like you are wanting so that it can match an angled RV wall like in the picture…

For a 2024 Chevrolet Silverado 3500 with a diesel engine you will want the EcoHitch Hidden Front Mount Trailer Hitch item #EH57FR. This hitch is custom fit and bolts to your Silverado with included hardware. It has been confirmed to fit all models…

I did some checking and TorkLift SpringLoad XL Turnbuckles for Frame-Mounted Camper Tie-Downs - Stainless Steel - Qty 2 Item #TLS9050A has a reach of 35" to 45".

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

In regards to the Curt Front Mount Trailer Hitch Receiver part #C52NR which is a fit for a 2022 GMC Sierra 2500, the tow hooks do not need to be removed. I have attached a photo below which shows both the trailer hitch and tow hooks in place. I…

The HappiJac Direct-to-Frame Truck-Mounted Camper Tie-Downs like part #LC182860 will work best with the HappiJac Original Turnbuckles for Camper Tie-Downs part #LC182898 when you replace the front turnbuckle j-hooks with the Replacement Threaded…

The support braces in the HappiJac Truck-Mounted Camper Tie-Downs #LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the…

The Derringer set you referenced is only available in a set of 4 that has two longer and two shorter turnbuckles but we do have the Torklift Springload part #TLS9050A which is a set of two that has a range of 35 to 45 inches which is similar to the…

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

The "with/without board or step underneath truck bed" designation is referring to whether or not a step or nerf board runs underneath the truck bed. If you have these and they don't extend beyond the cab then you would choose the…