bing tracking image

Hidden Hitch Ball Mounts - Fixed Ball Mount - 80232 Review

content loading

Customers compare 80232 to these similar products

Products Featured in this Video

Review of Hidden Hitch Ball Mounts 80232

Today, we're reviewing Part Number 80232 from Hidden Hitch. This is a Class 3 Ball Mount with a 3-1/4 inch rise or a 2-inch drop and a super extra long shank. The towing capacity rating is 6,000 pounds and the tongue weight is rated at 600 pounds. As you can see the shank is hollow and it is cut at an angle. It makes it a little easier for you to slide this into your receiver. This uses a ball with a 1-inch shank diameter.

There is a 3-1/4 inch rise from the top of the shank to the top of the ball mount platform and a 2-inch drop from the top of the shank to the ball mount platform. Let's see how this measures up, from the center of the hitch pinhole, which is here, to the beginning of the ball platform is 11 inches and it is 16 inches from the center of the hitch pinhole to the center of the ball hole. This will accommodate Class 3, that's 2 by 2 inch ball mount accessories. And that's it for Part Number 80232, the Hidden Hitch Ball Mount Class 3 with a 3/4 inch rise and a 2-inch drop.

Questions and Comments about this Video

Does this fit a Kubota x1140?
Etrailer Expert
Reply from David B.

The Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs # 80232 will fit a 2 inch by 2 inch hitch receiver. So if your Kubota has a receiver opening that is 2"x2" it will fit.

Info for this part was:

Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video Edited:
Kathleen M
Employee Zach D
Video Edited:
Zach D
Employee Cole B
Installed by:
Cole B
Employee Chris R
Installed by:
Chris R
Employee Adam E
Video by:
Adam E

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.