bing tracking image

Hopkins Wiring - Trailer Connectors - 48195 Review

content loading

Customers compare 48195 to these similar products




Products Featured in this Video



Review of Hopkins Wiring 48195


Today, we're going to review part number 48195, this is the Hopkins quick fix four way flat car and trailer ends. This part comes with everything shown here. This allows you to replace a damaged four wire flat on your wiring harness. When you connect it, there is no external splices. It includes both the vehicle side and the trailer side connector. It is designed to use 14 gauge, up to 16 gauge wire. Basically, it also comes with a nice package of terminal grease so when you make your connections, you put some grease one it, it will help maintain those connections and protect them.

Basically, what you do, like in this case, this would be the trailer side. You'll see you just cut off your old four way, have the wires separate. Each, they do have the markings for ground, tail light, left turn, right turn, so it helps you out. Just run your wire in there. Once you've got all your wires in there, you just take this cap, the cap would go right in there, and then all you do is just push down. I don't want to do that because it does lock in place, but you push down all the way and it would secure your wires and you have a new four way connection point.

Same way on the vehicle end and it also is marked also. That should do it for the review on part number 48195. This is the Hopkins quick fix four way flat car and trailer ends. .


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Andrew K
Video by:
Andrew K
Employee Joshua S
Video Edited:
Joshua S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.