bing tracking image

Hopkins Wiring - Trailer Connectors - HM48114 Review

content loading

Customers compare HM48114 to these similar products




Products Featured in this Video



Review of Hopkins Wiring HM48114


Today we're going to be taking a look at the Hopkins Endurance Easy Pull Harness with the 4-pole flat trailer connector for the trailer end. This 4-way flat trailer end connector plugs into the 4-way flat on your vehicle. It's going to feature an easy-to-pull ring that makes the 4-way easy to disconnect. The ring handle makes it easy to pull the connector straight back for proper leverage, so that way you don't have to sit there and wiggle the plug, or wiggle the handle, which sometimes either damages wiring or over time actually damages your terminals. Really nice design. Easy grip design makes it easy to pull the connector straight back for proper leverage, easily disconnecting the connector and protecting the wiring and the terminals. Pretty simple installation.

It simply hard wires to the existing trailer wiring. It's going to feature a corrosion resistant terminal design. Those terminals are long-lasting, and it's going to come with a dust cover. That way you can cover up these connectors whenever the plug is not being used, and it's going to come with some terminal grease. That can be applied to the connection points to protect the terminals from corrosion. When it comes to the ring diameter, that inner diameter is going to be 1".

Outside edge to outside edge, that diameter is about 1 7/8". The wiring harness length, it's going to measure about 12" long. When it comes to the configuration, each wire is labeled with its function. On this one, you're going to have a black wire with a white strip. That's your ground.

Then you're going to have a brown wire, which is for the tail lights. You're going to have a green wire, which is for the right turn, and then you're going to have a yellow wire, which is going to be for the left turn and brake. That's going to do it for today's look at the Hopkins Endurance Easy Pull Harness with the 4-pole flat trailer connector for the trailer end.


Info for this part was:

Employee Zack K
Video Edited:
Zack K
Employee Chris R
Video Edited:
Chris R
Employee Cole B
Installed by:
Cole B
Employee Shane H
Installed by:
Shane H
Employee Jonathan Y
Video by:
Jonathan Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.