bing tracking image

Review of InfiniteRule Hitch - Stainless Steel Hitch Locks - IR57FR

content loading

Customers compare IR57FR to these similar products




Products Featured in this Video



InfiniteRule Hitch - Stainless Steel Hitch Locks - IR57FR Review


Jeff: Hello, everybody. This is Jeff at etrailer.com. Today, we're going to take a look at the InfiniteRule Locking Pins for the B&W Tow & Stow ball mounts. It's for a quantity of three pins. Now these are nice flush-style locking pins that will replace the standard pins and clips on your B&W Tow & Stow 10,000 pound and 14,500 pound adjustable ball mounts. Basically, on those Tow & Stow ball mounts, they use two pins to secure the ball platform to the ball mount, and they use an additional pin to secure the hitch ball to the ball mount platform.

These will allow you to take out the standard pins and clips and lock them with these locking pins that allow you to lock the ball platform and the hitch ball to your ball mount.These are nice heavy duty rust resistant stainless steel construction. They do use a nice weather resistant tethered dust cover here that helps keep water and debris out of the lock cylinder. Basically, when you're not using it, you just put that over there to protect it. They also have O-rings on the inside that will protect the internal components from dirt and grime. That, I wanted to zoom in and just show you.

You take one of the keys and if you insert it and then you just turn the key like you're unscrewing a bolt. And once you unscrew it enough, it'll come apart. And there is the O-ring I was talking about that will help seal it, keep out any dirt and grime from your lock. And the lock cores are keyed alike and there is three keys included. You can see it comes with the three keys.

These parts are made in the USA.And just to put it back on, you twist your key, just like here again, tightening a bolt to a screw. And once it snugs down and just back it off a little bit, take your key out and put your cover on and you're all set to go, just like that.Again, these are made in the USA. A few specs on this. The application, again, is for the B&W Tow & Stow 10,000 pound and 14,500 pound adjustable ball mounts for two inch and two and a half inch hitches. The pin diameter is five-eighths of an inch.

The sheer strength on these pins is 42,000 pounds. And the dimension on these, if we do the overall dimension from one end to the other, is going to be right at six and three-quarter inches. And in the inside pin length, or the span as they call it, measured from here to here is going to be right at four and one-eighths inches. And again, you put your dust cover on there. But that should do it for the review on the InfiniteRule Locking Pins for the B&W Tow & Stow ball mounts..


Questions and Comments about this Video

Info for this part was:

Employee Jeff D
Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.