Customers compare 315-W3200D to these similar products
Products Featured in this Video
Hi there, I'm Michael with etrailer.com. Today we're gonna take a quick look at this two-speed boat trailer winch. This is a hand winch that will mount onto your truck or trailer to make it easier for you to load your boat, ATV, or other heavy equipment. This is constructed of heat-treated high carbon steel, so it is going to be very strong and durable for you. It's got a capacity of 3,200… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Videos
Help Articles
Expert Answers
The 2-Speed Boat Trailer Winch part #315-W3200D is an excellent upgraded 3,200 lb winch for a boat trailer. In regards to mounting, not all winches use the same pattern so you'd need to compare the dimensions in the photo below to what you…
view full answer...The CE Smith U-bolt #CE15253A could be used to mount the CE Smith Offset Spool #CE32150G. The diameter of the u-bolt and the mounting bracket of the offset spool are both 7/16 inch, and are compatible. I have included a video demonstration of the…
view full answer...The size winch that you will need depends on a couple of different factors. I have included part of our hand winch FAQ below regarding boat winches and have linked the FAQ article for you to view. Finding the Right Capacity Winch for your Boat…
view full answer...You may be experiencing some wear in the suspension components that can cause tire wear and also be a symptom or cause the axle to be misaligned. Inspect your suspension components and if any of the holes where hardware goes is egg-shaped, that…
view full answer...That's a really unusual place for winch to bend/fail. I'd be willing to be the issue is that the angle of the winch's pull is not ideal. What degree is the winch pulling from relative to the winch plate direction? Parallel?
view full answer...The winch cable I recommend for a Shelby 5480A Boat Trailer Winch is the Fulton Galvanized Winch Cable with Hook part #FWC3250100 which measures 25' long and has the needed weight capacity. In regards to weight ratings, there are many factors…
view full answer...Hey Ryan, yeah you're right TDE is no longer a thing and unfortunately we don't carry a replacement reverse solenoid for that actuator so at this moment your best bet would be to replace the entire thing with the Dexter DX7.5L A-60 Brake…
view full answer...I have a solution for you, but the #F142421 is designed only to be used with cable. Instead you'll want to use the Dutton-Lainson Hand Winch - TUFFPLATE Finish - 2 Speed - Direct Drive - 3,200 lbs #DL15440, which can be used with either wire rope…
view full answer...It is always a good idea to use a winch that is overrated for the purpose you will be using it for. A winch that is used near the bottom end of its capacity will last much longer then a winch used at the top end of its capacity. We do have wire rope…
view full answer...We can get you set up with a good replacement for your 2,600 lb Fulton winch, but let's start with what you asked in regards to the strap vs. the cable, with the latter being the better choice. A strap is fine but there is a risk of fraying or…
view full answer...When it comes to getting a shorter handle for The 2-Speed Boat Trailer Winch with 20' Strap and Brake - 3,200 pounds #315-W3200D The Replacement Handle for Dutton-Lainson Single Speed Hand Winch - 7 inch Long #DL70305 mounts to the same size…
view full answer...The Dexter drop-n-go #099-175-20 would definitely have the same capability as your TDE actuator, provided it is a disc brake setup. TDE is no longer in business so I'm afraid finding a direct replacement will be impossible. My main concern is the…
view full answer...