bing tracking image

K Source Custom Towing Mirrors - Snap-On Mirror - KS80920 Review

content loading

Customers compare KS80920 to these similar products




Products Featured in this Video



Review of K Source Custom Towing Mirrors KS80920


Today we're going to be taking a look at the K-Source Snap and Zap custom towing mirrors. Both the driver and passenger side are included. These mirrors fit certain years of the Cadillac Escalade, Chevrolet Suburban, Chevrolet Tahoe, GMC Yukon and Yukon XL. The towing mirrors snap over the backs of your factory side view mirrors to extend your line of sight. It's going to give you an expanded view of the road in your trailer. It's going to allow you to safely and easily change lanes, pass, and park. The custom design is going to match the contours of your existing mirrors perfectly.

What that does is it really helps prevent vibration and wind noise and it's going to provide a nice secure fit for your vehicle. Right here inside the housing there's going to be padding on the inside. It's going to keep these towing mirrors really in place for that nice snug fit. It's going to prevent the towing mirrors from scratching your factory mirrors. The add-on mirrors retain the use of factory mirror features such as puddle lamps and power folding functions. They'll work on heated and non-heated models.

Here on the bottom you'll see the cutout for the puddle lamp. These will not obstruct the factory mirror faces and they will not interfere with adjustments to the factory mirrors. There's also going to be a slot right here. That gives you access to a set screw located directly behind the mirror face. That's going to allow you to tighten the mirror into place.

If you notice vibration or looseness you can tighten that up to take that out. That's going to allow you to lock in the angle that works best for your towing setup. When it comes to the installation, it's an easy tool-free installation as well as removal. No additional hardware is required. It's going to have the built-in mounting tabs, two up top, four on the bottom. These are clips that are going to grab the inside edges of your factory mirrors.

That bottom tab is a little bit larger. That way you can easily push to remove the mirrors for garage storage or fitting into tighter parking spaces. They're going to have a black plastic housing that's going to provide a clean look. It's going to do a great job at resisting corrosion. Again, both the driver's side and passenger side mirrors are included. They meet federal motor vehicle safety standards. When it comes to the mirror face dimension each one's going to measure the same at the widest point. We're looking at about 3 3/8 of an inch wide. At the tallest point that's going to measure about 4 1/2 inches. When it comes to adjusting the mirror face, all you've got to do is press in on the corners or on the sides to achieve the angle that you need for your towing setup. It's also going to come with a slotted storage bag. That's going to allow you to safely stow the mirrors when they're not being used. It's also going to keep the mirrors from rubbing against one another. That's going to reduce scratching and abrasions. That way when you're ready to use your mirrors again they're already set and ready to go. All you've got to do is pull them out of the bag and install them on your vehicle. Please note that these snap on towing mirrors will not fit OEM extendable mirrors. That's going to do it for today's look at the K-Source Snap and Zap custom towing mirrors.


Info for this part was:

Employee Andrew K
Video by:
Andrew K
Employee John S
Video by:
John S
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Colin H
Test Fit:
Colin H
Employee Hayden R
Test Fit:
Hayden R
Employee Adam E
Test Fit:
Adam E
Employee Evangeline M
Test Fit:
Evangeline M
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.