bing tracking image

Kenda Tires and Wheels - Tire with Wheel - AM30150 Review

content loading

Customers compare AM30150 to these similar products

Products Featured in this Video

Review of Kenda Tires and Wheels AM30150

Today, we'll be talking about part number: AM30150 - the Kenda 5.7 X 8 Bias Trailer Tire on the Dextar 8" Galvanized Wheel. The steel wheel is galvanized for superior rust resistance. This wheel measures 8" in diameter by 3-3/4" wide. It has a 5 on 4-1/2" bolt pattern, meaning that it has five lug holes on a 4-1/2" spread. To get this measurement, there are a few ways, we'll go ahead and show you… see more >     

Ron L.


I have a Stinger Single Rail Motorcycle Trailer Sur Lube Grease system. It has LOAD STAR Trailer Tires 5.70 - 8 Load Range C 6 Ply Rating Maximum Load 910lbs @ 75 PSI Cold 5 Lug Steel Wheels The Bike I’m loading on the trailer weighs just under 750 lbs. I’m heading on a trip that’s about 1400 miles. How much air pressure should I have in the tires? _______________ What should the lug nuts be torque to? _______________ What would be the recommended maximum towing speed? _______________ I will probably be towing for about 20 to 21 hrs. Without stopping other than gas. Do you have any recommendations? The Trailer has been stored inside and the bearings have been greased every 1500 miles on average. Wheels are solid with no play and run smooth. Do you sell wheel bearings for the Stinger Trailer? Do you sell trailer axles or spindles for the Stinger Trailer?

Les D.


@RonL You should inflate your trailer tires to the PSI recommended on the sidewall of the tire. Regarding the lug nut torque, I have attached a link below that has a chart for most wheel and lug nut combinations. Maximum towing speed for your tires will be based on the speed rating letter molded into your tire. For instance Speed Rating "G" is 56 mph. J-62, K-68, L-75, M-81, N-87, P-93. If tires are not marked they are the default is 65 mph. If your trailer has a speed rating it will be labeled on your trailer or in your owners manual. Regarding bearings, grease seals and rings, simply remove the existing ones and let me know the number etched in them, or take measurements. Sounds like you are ready for the road. Have fun!

Ronn R.


great videos!!!

Info for this part was:

Employee Jeff D
Installed by:
Jeff D

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.