Customers compare AM3S120 to these similar products
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
If you arent overloading your current wheel/tire combo then I wouldnt necessarily recommend going with a different setup. If you have the clearance for a larger setup then it technically would work, as long as the motives for going to a different…
view full answer...I will start by sating that the wheels/tires on the trailer you are looking at do look kind of undersized. So you definitely can stay with a 13" set up like the Kenda Karrier ST185/80R13 Radial Trailer Tire - Load Range D #AM10208 and Dexstar…
view full answer...From what I can find online, it looks like there were three options for the Lo-Liner. One option was the 13 foot version weighing 1300 lbs, a 15 foot option weighing 1800 lbs, and then a 17 foot option weighing 2,550 lbs. From what I can find these…
view full answer...You'd need to go with the tire part #TT48012C as it's only option for 12 inch wheel that has an 81 mph speed rating and then for a matching wheel part #AM20124 which has the 4 bolt pattern you need. We also don't have a way to mount them…
view full answer...It's fairly common for trailer wheel/tire combos to be changed like you asked about. Assuming you have the additional fender clearance you could replace your current 5.3-12 tire that is mounted on a 4 inch wheel with a 4 bolt pattern with a…
view full answer...The weight capacity for Rackem Fitz-All Enclosed Trailer Ladder Rack part #RA-28 at a 7 ft width is 400 pounds. These racks are designed for fiberglass ladders, if you need more capacity another set can be added to spread the weight out more.
view full answer...Based on your wheel size and tire diameter the tire size you have now would be the 4.80-8 which the biggest replacement for that would be the 5.70-8 like the #AM10012 which is 2 inches taller.
view full answer...Unfortunately, I cannot find the axle information for your trailer which would identify the bearings and seals. You will need to pull apart one of your hubs to check the parts for identification numbers or to measure your spindle with a Caliper…
view full answer...The closest trailer axle we offer for what you're looking for is the CE Smith Trailer Axle Beam part #CE33201GA which measures 57-1/2" long at the hub face and 46-1/2" long at the spring center. If the spring center does not match, they…
view full answer...The best tire for your trailer will really depend on how much time you spend on paved roads versus dirt or gravel roads. At the 175/80-13 tire size, you can choose between a radial tire and a bias ply tire. Radial tires, like part #AM10210, have more…
view full answer...I am not sure what you mean by "short hub" but I went out to the warehouse and found that the Trailer Idler Hub Assembly #AKIHUB-440-2-2K you referenced has a total depth of 4-1/4" as you can see in the attached picture.
view full answer...The pilot diameter on a wheel, like the one with part #AM30620, is the diameter of the bigger hole that is directly in the middle of the wheel. The pilot hole diameter of the wheel for the part I just measured is 2.84". I have attached a picture…
view full answer...