Customers compare AM3S334 to these similar products
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Hello Scott, thanks for reaching out. For a 4 wheel trailer I recommend the TST TPMS System #TST-507-RV-4-C. This one comes with 4 sensors, a signal booster and a color display. You can alwasy add more sensors if you want to monitor the vehicle tires…
view full answer...The ST185/80D13 trailer tire will be 10mm wider and the tire will go from 24 inches tall to 24-1/2 inches tall. Just make sure you have space to accommodate the extra height and width so that you do not end up with tire rub. Load range C tires have a…
view full answer...The Karrier ST175/80R13 Radial Trailer Tire with 13" Galvanized Wheel #AM31994 will work if the 1,610 lbs at 65 psi weight rating (per tire) is enough for your boat and trailer. This gives you a total weight capacity of 6,440 lbs. If you need a…
view full answer...The Detail K2 Mighty Multi A-Frame item #K2MMT5X7 trailers do not leave much space between the top of the wheel and the inside of the fender. You would have to either remove your fenders or move them up. I can confirm that both the Karrier…
view full answer...Your math is correct in your trailer weight load example. If a fully-loaded tandem axle trailer weighs 4000-lbs then each of the 4 tires will bear 1/4th of that load, or 1000-lbs. In this case a tire rated for 1300-lbs would provide a good safety…
view full answer...Karrier and Loadstar are two different brand names used by Kenda. There's no difference in quality or function between the two brand names. For a ST175/80-13 Radial trailer tire in load range D, I'd recommend part #AM10210 if you're…
view full answer...Wheel bolt patterns are defined by two numbers: the first being the number of lug nuts and the second being the diameter of the circle the lug nuts are arranged in. So a 5 on 4-1/2 bolt pattern is 5 lugs arranged in a circle that is 4-1/2 inches in…
view full answer...The best option we have for the tire size of 5.30-12 would be the Taskmaster tire part #TT53012C. This is a radial like you mentioned which is much better for highway use than a bias-ply. Radial ply tires are designed for trailers that are towed on…
view full answer...The difference between the letter R and D in the tire size you mentioned has to do with the construction of the tire. R stands for radial and D stands for Bias Ply. The main difference between a radial ply and a bias ply tire is how the tire is…
view full answer...We don't carry that rim size. We have a tire size that matches, but not a rim. Your tire size has an overall diameter of 21.1 inches. The closest wheel and tire size we have to that is the 145/80-12 which has a diameter of 21.3 inches. For that…
view full answer...You should always follow what is printed on the side of the tire from the trailer tire manufacturer. Tires inevitably get replaced over time so what was printed on the trailer will no longer be accurate. For trailer tires, this will typically be the…
view full answer...Axles that are 3,500 lbs are all 2-3/8 inches in diameter, and that is the diameter of the 3,500 lb Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs #35545I-ST-89.
view full answer...