bing tracking image

Review of LaSalle Bristol RV Sewer - Waste Valves - 34466N4AB36GM

content loading

Customers compare 34466N4AB36GM to these similar products




Products Featured in this Video



LaSalle Bristol RV Sewer - Waste Valves - 34466N4AB36GM Review


Today we're taking a look at the LaSalle Bristol Cable Actuated RV Waste Valve, for Black Water tanks. Now this waste valve assembly allows waste water to travel from your tank when the valve is in the open position. It has 36 inch long cable that allows the valve to be placed in a secure location or hard to reach spot. Then it has an easy to grip handle on the end of the cable that can be mounted in a convenient location, so you can easily open or close the valve without crawling under your RV. If you can see in the valve there when I operate the handle it controls the gate right there on the valve. It's nice and easy to use, doesn't take much effort at all.

The cable is lubricated for smooth, effortless movement. Also, the valve seals are lubricated to resist leaking.It features the nonstick coating to keep the sewage off of the seals, and you won't have to worry about drying or cracking like with the non lubricated rubber seals. The valve body is a sturdy plastic construction to resist water damage. It does have a thick steel cable, it's very durable and long lasting and it has that protective coating which limits the corrosion. It's a simple installation, the hub end fits over your sewer pipe.

The spigot end slides into your sewer pipe. Now you will need to use some AVS solvent cement to get it installed and to get it nice and secure. That's sold separately, available at etrailer.com. This unit is NSF approved, it's made in the USA. It's designed for three inch diameter Black Water Sewer Pipe.

Again, the cable length is 36 inches. Comes with the hardware on there, and the stem right here is a steel construction and you get a nut, a washer, and then another nut. That way you can get it easily installed.When it comes to the actual valve body, pretty standard. The measurement we get here on the spigot end, outer edge to outer edge, is about three and a half inches. The hub end, inside edge to inside edge, is about three and a half inches.

If we take a measurement from the top of this portion to the bottom, we can see that is gonna give us a measurement of around, pretty close to 14 inches.That's gonna do it for today's look at the LaSalle Bristol Cable Actuated RV Waste Valve, for Black Water tanks.


Info for this part was:

Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.