In-Depth Review of the Replacement Front Cover for Solera Power RV Awnings Video

Thank you for the photos! It looks like you have the Regal Style awning head so for a replacement front cover you need part #LC643923 for the idler side. If there is a clip missing on the back cover then I recommend replacing that as well so the…

Based on the pictures you definitely need the awning support arm #LC281154. I can't tell in that other photo if the pin is bent or damaged, or just barely hanging in there. I'm also not sure if your idler head and roller endcap are ok or not…

Hey Kenny, so for the arm itself you can use the Replacement Short Arm Assembly for RV Awnings #LC404523 and for the cover you can use either #LC643922 (drive) or #LC643923 (idler) depending on which side you need.

Thanks for the photo and it does show the left side, which is the idler head side. I can verify for you that the you do have the correct replacement cover: - Replacement Cover for Solera Awnings - Idler Head - Front Cover - Black #LC643923 This will…

For your Solera Awning, you can use the Replacement Cover for Solera Awnings #LC643923 for the front, and the Replacement Cover for Solera Awning #LC643921 for the back. I have included a couple of videos for you to check out as well.

Since you have a regal-style Solera awning the correct front cover for the drive head would be part #LC643922. If you needed to replace the idler head as well then you'd want part #LC643923. If the back side of the cover is damaged for either…

To remove the front cover #LC643923 from your Solera Awning there are indeed 2 screws that need to be removed. If you look at the back f the idler head unit you can see the locations where the screws reside that you need to remove. I have attached a…

There are two different types of Solera Power Awnings. The older style which had the LCI logo on the front cover and the new regal style which does not have the LCI logo on the front cover. If the old Solera Awning Plain Drive Head Front Cover, Black…

I spoke to my contact at Lippert and he told me the Replacement Cover for Solera Awnings - Idler Head - Front Cover - Black #LC643923 would be the correct replacement cover for your power awnings. If you need the motor side cover, that will be the…

I took a look at the Replacement Cover for Solera Awnings #LC643923 that you're referring to, and I see the confusion! However, #LC643923 only has one hole as shown in the images I've attached, the squarer sized hole you're seeing in…

Black or white are the OEM colors for the idler head. The Replacement Solera Manual Awning Head Cover Fastener - #6 x 1/2" Screw - Qty 1 #LC266156 is what you are seeking. You will need 6 of them for each head assembly.

While I do not have a video demonstrating how to install or remove the idler head and drive head cover for the Lippert Edge Awnings, it is a pretty simple process. You will need to extend the awning out far enough to get access to behind the cover,…