Comprehensive Review: Replacement Drive Head for Solera Power RV Awnings Video

Hello Kyle. It is possible to replace the Idler Head Pin #LC27WD by itself. That said, Lippert does recommend replacing the entire idler head, just to be sure everything will align correctly and work together smoothly. If the pin was damaged, it is…

The Regal Drive Head #LC53TF is a little skinnier and doesn't have a logo while the Plain Drive Head #LC273478 is a little wider and has the LCI logo on it (see attached).

For the Lippert Solera Power Awnings 672050 you will want the Solera Power Awning Drive Head Black item #LC273478. This is the replacement drive head. The Solera Power Awning Idler Head item #LC672052 is the replacement idler head.

Are you sure that's the part number? I wasn't able to find any reference to that. Can you see a brand on the motor?

The correct gas strut for your powered or manual Solera awning will simply depend on which Solera awning arm assembly you have. If you have a Solera Short or Flat awning arm assembly (which will use something like the Solera Short Awning Support Arm…

I did some checking and it appears that the gas strut #LC260282 is held to the support arms with bolts, pins, or rivets that go through the eyelets at each end, see picture. It does not appear that the strut unscrews from those eyelets. The…

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

Yes, as long as your current arm measures 63 inches vertically when folded up the part #LC97UD would be the correct replacement.

Hey Jim, yes the parts you saw in a different answer are correct for your 20 foot Solera awning: Replacement Head Pin for Solera Power Awning Gear Drive Head part #LC266141 Replacement Retaining Clips part #LC266137 Replacement Bushing part #LC281828…

The Furrion #FMCM15SS is a great appliance that will meet your needs. I researched the dimensions of your original Dometic and discovered they are 29 15/16" wide x 16 7/16" tall x 15 3/8" deep. The Furrion I'm recommending will fit…

To remove the old pin you'll need to remove the cover, remove the two retaining pins, and then slide the old pin out. To install the #LC93FR you'd just reverse the process.

There will probably be issues with the Curt rack, product #C18087, since the wheel hoops are too large to secure a set of 14 inch tires. Fortunately, we have a bike rack that will suit your needs. It's the Saris Freedom 4 Bike Platform Rack, part…