bing tracking image

Lock N Roll Straight Tongue Trailer Coupler - Off Road Coupler - 336TS506 Review

content loading

Customers compare 336TS506 to these similar products

Products Featured in this Video

Review of Lock N Roll Straight Tongue Trailer Coupler 336TS506

Speaker 1: Today we're taking a look at the Lock and Roll Channel Tongue Trailer Coupler for the trailer side. The Lock and Roll trailer coupler lets you hook up your trailer to your tow vehicle, so it provides a connection point for the Lock and Roll Vehicle Side Coupler, which is sold separately and available at coupler tube, which is this portion here, bolts or welds onto any two and a half inch wide trailer tongue. We can tell that by taking a measurement from inside edge to inside edge and we can see that that measurement measures right around that two and a half inch mark. Also the tube length measuring from this point here to the end of the tube, that gives us a measurement of around six and 5/8ths inches.Now this coupler system is safe, it's easy to use, and it's on of the most versatile options available on the market today. This is ideal for off road use or for use over rough terrain. It would be ideal for applications like let's say a UTV or ATV, pulling a trailer through the woods on a trail.

There's a lot of times where you have to get out and reconnect no matter how secure the connection point is, with a standard ball and coupler. This would definitely resolve that issue. So it's ideal for off road use, works really well for pulling a trailer with a UTV or ATV.When coupling with the vehicle side coupler, there's these latch plates. So these latch plates lock in place for a secure connection. That also offers visible connection points, to eliminate any question as to whether the trailer is actually hitched correctly or not.

Also when coupled, you actually have 360 degree rotation and three axis of movement at the connection point. So right here you can see the side to side, the other one, like the vehicle side coupler would provide the other direction of rotation for a 360 degree rotation. What that does is it really helps prevent twisting damage to the vehicle and trailer frames that's typically caused by sudden changes in vehicle trailer orientation.With this unit, you also have a wider range of motion, which allows you to couple and uncouple the trailer with ease. Also, very helpful when backing a trailer around a corner and into a tight spot. The unit features very tight, close fitting connections to reduce shock and chucking.

We're looking at a sturdy steel construction. It's SAEJ6A4 certified. The mount holes on the unit, we have two on each side, these are separated on center by three inches. The diameter on those is a half inch, mounting hardware not included, so keep that in mind. But this can be bolted or welded to the trailer.

The maximum gross trailer weight capacity is 11,000 pounds. Maximum tongue weight is 1,100 pounds. The product's made in the USA and covered with a limited lifetime warranty.But that's going to do it for today's look at the Lock and Roll Channel Tongue Trailer Coupler for the trailer side.

Questions and Comments about this Video

Info for this part was:

Employee Cole B
Installed by:
Cole B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.