bing tracking image

Lock N Roll Straight Tongue Trailer Coupler - Off Road Coupler - 336TS528 Review

content loading

Customers compare 336TS528 to these similar products




Products Featured in this Video



Review of Lock N Roll Straight Tongue Trailer Coupler 336TS528


Speaker 1: Today we're taking a look at the lock and roll channel tongue trailer coupler. This is for the trailer side. The lock and roll trailer coupler lets you hook up your trailer to your tow vehicle. It provides the connection point for the lock and roll vehicle side coupler, which is sold separately. The coupler tube, which is this portion right here, bolts or welds to any two inch wide trailer tongue. We can tell that by taking a measurement of the internal width, so inside edge to inside edge.

It measures right around two inches. Then that tube length, I took a measurement from edge to edge. Inside edge to inside edge is about seven inches long.Now, this coupler system is safe, t's easy to use, and it's one of the most versatile options available on the market today. When coupling, the latch plates from the vehicle side coupler lock in place for a very tight, secure connection. The visible connection point eliminates any question as to whether the trailer is hitched correctly or not.

When coupled, you have 360 degree rotation and three axes of movement at the connection point. Again, very versatile. It prevents twisting damage to the vehicle and trailer frames that's caused by sudden changes in vehicle-trailer orientation.This is a hitch that's really great for off road use. It offers wide range of motion, which is great for a couple different reasons. One, it's very helpful when it comes to backing your trailer up around a corner or into a tight spot, and it makes it very easy to couple and uncouple the trailer with ease really at any time.

It offers very tight, close fitting connection to reduce shock and chucking.We're looking at a durable steel construction. It's SAE J684 certified. When it comes to the mount hole dimensions, these mount holes are separated apart from one another on center by three inches, and they have a diameter of a half inch. Now, the maximum gross trailer weight capacity for this unit is 6,000 pounds. Maximum ton weight capacity is 600 pounds.

It's made in the USA and covered with a limited lifetime warranty. That's going to do it for today's look at the lock and roll channel tongue trailer coupler for the trailer side.


Questions and Comments about this Video

Info for this part was:

Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.