bing tracking image

Review of MORryde Fifth Wheel King Pin - Pull Rite Hitch Adapter - MR57ZR

content loading

Customers compare MR57ZR to these similar products

Products Featured in this Video

MORryde Fifth Wheel King Pin - Pull Rite Hitch Adapter - MR57ZR Review

Hello everybody. This is Jeff at Today we're gonna take a look at this Mor-ryde pin box adaptor for the Pull Rite SuperGlide hitch. Now this adapter plate will let you connect your Mor-ryde pin box to your Pull Rite SuperGlide hitch. This is a nice heavy duty skid plate. You can see has the welded on wedge already.

And this well let you enjoy towing your fifth wheel RV with reduced chucking and jerking for a lot more comfortable in cab ride. This is a connection for all Mor-Ryde pin boxes. It is designed for short bed vehicles. It is a bolt on application. It'll easily bolt onto the pin box with the included hardware, which is the bolts, the nuts and the spacer blocks.

This part as made in the USA. Just to get a few dimensions on this. Width of it is right at 13 and a half inches. Total length it's right at 17 and three quarter inches. Total height on it from the very bottom to the very top is right at three inches.

And then the wedge that's already welded on that adds in about another inch of height to it. But that should do it for the review on the Mor-ryde pin box adapter for the Pull Rite Superglide hitch..

Cj M.


Is this the correct adapter to work for the Mor-Ryde cushion pin box. I am needing the capture plate for a Pullrite 2900 super slide.

Etrailer Expert

Jon G.


Sure is!

Info for this part was:

Employee Jeff D
Installed by:
Jeff D

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.