bing tracking image

Review of MORryde RV TV Mount - Adjustable TV Wall Mount for RVs - MR65ZR

content loading

Customers compare MR65ZR to these similar products




Products Featured in this Video



MORryde RV TV Mount - Adjustable TV Wall Mount for RVs - MR65ZR Review


Hi there. I'm Michael with etrailer.com. Today, we're gonna take a quick look at this more ride full motion TV wall mount. This bracket is going to securely hold your RVs TV to your wall on your RV. This TV mount will extend out as you can see Zack here working with a mounted television. So it's going to extend out quite a bit there.

It's going to give you the option to swivel the TV 350 degrees, or tilt it up to 10.5 degrees. Or you can also swing it from side to side, 180 degrees. So it gives you a lot of options to make sure that you're getting the perfect viewing angle. And then when you're done, ready to move, you can collapse it back against the wall and it will walk right into place so that it's not going to move as you are going down the road. The mounting plate here is a 8 7/8 inch wide by 8 7/8 inch tall plate.

That's going to have three VESA compliant mounting patterns. So you're gonna have a 75 millimeter by 75 millimeter, a 100 millimeter by 100 millimeter, and a 200 millimeter by 200 millimeter pattern here. So that's going to accommodate a wide range of televisions out there. This does have a maximum load capacity of 25 pounds. So you want to make sure that your TV is going to fall within that weight range.

And obviously you do wanna make sure that your wall is gonna be able to support the weight of the television and the bracket itself. So when we have it fully retracted as it is now, it is just about 3 3/8 of an inch deep counting our handle down here at the bottom, it is right at 10 5/8 of an inch tall and counting from the side of the bracket all the way out to the side of our arms here, it's about 14 3/4 of an inch wide. So make sure that that's gonna work for your setup when it's fully retracted. When we extend it out, it's going to, we're just gonna pull on this knob here to unlock it and then pull out. You can see these joints are a little stiff which is kinda nice when you are working with a television, you don't want it to be too flimsy and wobbly.

So when we have it fully extended out like this, it is going to be right about 26 inches from the top of our plate. When it is in the full tilt forward position back to our mounting plate, 26 inches deep, it is still the same height and the width is going down a bit because we don't have those arms sticking out to the site here. So it's only about 12 1/4 of an inch wide. So a really nice option for you to make sure that you can see your television from any place in your RV, where you have this mounted, it's gonna give you lots of options to adjust. And like I said, these pivot points are pretty stiff but they are going to give you a nice sturdy support for your television. And then when we are ready to load up, we can see this knob here is going to hold it in place. So we don't have to worry about our TV swinging out as we're traveling down the road. This is made here in the USA. So you can trust, it's made to the high quality standards that we've come to know and trust for products that are made here in the US. So if you are looking for a really nice TV wall mount, this is gonna do a good job, give you lots of options as to viewing angle. We do have a very similar product here at etrailer.com. It's got a little bit higher weight capacity. So if you are needing a little bit more weight for your television, I would recommend that one but this is the 25 pound weight capacity. And it's gonna do a really good job for almost all your televisions in your RVs. So that's gonna complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..


Info for this part was:

Employee Michael B
Installed by:
Michael B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.