bing tracking image

Review of MORryde RV TV Mount - RV TV Adjustable Wall Mount - MR73ZR

content loading

Customers compare MR73ZR to these similar products




Products Featured in this Video



MORryde RV TV Mount - RV TV Adjustable Wall Mount - MR73ZR Review


Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this MoRryde Full Motion TV Wall Mount. This is going to mount onto your wall of your RV and then it will provide a wall mount for your television so that you can mount your TV onto the wall. This is going to have three different VESA compliant mounting patterns. So whether your TV has a 75 millimeter by 75 millimeter, a 100 by 100 millimeter or a 200 by 200 millimeter, this will allow it to attach on, you can see they include hardware for you to get your TV installed. As long as the TV does not exceed 35 pounds which is the maximum load capability for our wall mount, you'll be able to put your TV in place.

And then it does swivel out or extend out up to about 17 and five eights of an inch, so just under 18 inches of full extension here. It is going to allow you to pivot and twist and turn and just about any configuration so that you can get this to be viewed at whatever angle is gonna be best for you, so even at a 90 degree angle from the wall and that sort of thing. And then you also have the ability to tilt that forward and lock that in place. So if you need to have your TV tilted a little bit forward, you're gonna have a lot of different adjustability options for this to make sure that you're getting the best viewing angle for you. As far as our overall dimensions when we have this fully retracted like so, it is going to lock in place.

So it's not gonna move around while we're traveling to do include a couple of these chains. So you can put on that bottom latch there to pull that to allow it to open up like so. But when it is retracted it's only about a three and an eighth of an inch deep. It's only gonna stick out a little over three inches from your wall. It is going to be right at 10 and a half inches tall from the bottom of our handle there all the way to the top of our mounting plate.

And then from the very edge of our mounting plate over to our elbow of our extending arm and the back plate that will mount to the wall, it's right about 11 and one quarter of an inch wide. And when we extend it out, pour out on that locking tab again. Like I said it is gonna extend out just shy of 18 inches, so our depth now is gonna be right 19. When you have this extended out to, it's gonna give you about 19 inches of space there. So you want to make sure that that's gonna work for your setup.

It is right about 11 inches tall, real close to what it was before, and about 13 inches wide from the side of the mounting plate to the side of our wall plate here. The TV mounting plate itself is right at eight and seven eights of an inch by eight and seven of an inch. So it is gonna give you a nice solid plate to mount onto. And as far as that tilting, we are going to have 10.5 degrees forward tilt there, we're gonna have a swivel capability of 350 degrees, So not quite 360 full twist, but it is going to give you also 180 degrees of swing. So depending on where you need this, it's gonna give you lots of options there. These joints aren't super flexible, so as you can see, I'm trying to really push on them to get them to go into those other directions which is gonna make it a little bit tougher for you to get it set up the way you want to, you to have to kind of maneuver it. But that's much better than having it be too loose. And you're not gonna have to worry about it swinging around and that sort of thing. So it is a nice, solid option for you if you do have a television that you're wanting to mount on your wall. This is gonna give you a lot of options to make sure that you're getting that view and angle that you want. And then that locking ability there is gonna be really nice as you're traveling to make sure that you don't have to worry about it moving around. This is made here in the USA, so you can trust it is made to the high quality standards that we've come to know and trust for products that are made here in the US, so you don't have to worry about that. That should last you a nice long time, do a good job of allowing you to enjoy that TV. So that's gonna complete our look for today, again, I'm Michael with etrailer.com. Thanks for watching..


Info for this part was:

Employee Michael B
Installed by:
Michael B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.