bing tracking image

Review of MORryde RV TV Mount - Swivel Wall Mount - MR88ZR

content loading

Customers compare MR88ZR to these similar products




Products Featured in this Video



MORryde RV TV Mount - Swivel Wall Mount - MR88ZR Review


Jeff Hello, everybody, this is Jeff at etrailer.com. Today we can take a look at this MORryde swivel TV wall mount, how this wall-mounted bracket will securely hold your RV's medium size flat panel TV to your wall. Maximum load capacity this bracket'll hold is 50 pounds. And you can see the TV mount, once your TV's mounted, will allow your TV to swivel 15 degrees so that you can find the best viewing angle. Now it includes the wall mount bracket, the swivel TV mount and the installation hardware for mounting the wall mount bracket, and for mounting the TV to the TV bracket. It is a nice compact design, it does save space.

Basically what you'll do is take your wall mount bracket, this part right here, and this will mount to your wall, and, again, it comes with the hardware. Once that's mounted to the wall, what you do is then you can mount this, your TV, to this TV mount and it will accept three different VESA compliant mounting patterns, and the included hardware as you need it are included. Basically it'll accept a 75 millimeter by 75 millimeter VESA pattern, a hundred millimeter by a hundred millimeter pattern, and a 200 millimeter by 200 millimeter pattern on your TV. Once you line that up, use the correct hardware, mount the TV to this. Once this is mounted and then this is installed onto your wall, all you have to do is take your TV drop it over the top of this.

Once it's over the top, slide it right down into place. And then the holes will mount up. You take your bolts and just go ahead and screw those in. And screw them in all the way on one side, tighten it down. And then on the other side you'll do the same.

Line the screw up with the hole and then go ahead and snug that down. Use a Phillips screwdriver to snug it on both sides and then just like that, it'll hold it to your wall. And then again, there's your swivel of 15 degrees to get the correct viewing angle. These parts are made in the USA. A few specs on this.

I wanna give you the dimensions. We'll go ahead and take it off the wall mount again. 'Cause I can give you the wall mounts dimensions and then the separate TV mount dimensions. When it's all together like this, the overall dimensions, you're going to be right at eight and 7/8 inches wide, total height, 11 inches tall. And your total depth front to back is right at four inches deep. Now, if I go ahead and take it off I'll give you the dimensions of the TV mounting plate separately and the wall mount separately. Take our screws out. And then what you'll do is just lift it up off your wall bracket and take it off. So on your wall mount, the height on that is gonna be right at 11 inches. The width on just the wall mount bracket is two and a quarter inches. Total depth is about one inch. And then on your TV mount, that's basically gonna be eight and 7/8 inches by eight and 7/8 inches. But that should do it for the review on the MORryde swivel TV wall mount..


Info for this part was:

Employee Jeff D
Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.