bing tracking image

Review of MORryde RV TV Mount - Wall Mount - MR23ZR

content loading

Customers compare MR23ZR to these similar products




Products Featured in this Video



MORryde RV TV Mount - Wall Mount - MR23ZR Review


Hello everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at this more ride Full Motion TV Wall Mount. Now this selects you securely mount your TV to RVs wall and then allow you to swivel, tilt and extended so that you can find the best view. The wall-mounted bracket securely holds your RVs television. And then right down here, this spring loaded pin 'cause it'll hold it in the close position you just pull the knob to extend the TV and see if we can show you that if I pull this knob down and then if you pull out when your TV is on there you can see that you could extend it out.

And again, it'll allow you to swivel tilt and extend your TV. You can see all the way out it'll extend out about 18 inches. Then you can bring it back in so you can see the little swivel and it also can be tilted. Let me see what I can show you on the side here. See this portion right here, where your TV mounts you can actually tilt it up 10 and a half degrees and then you just tighten that down.

Now, the swivel portion it'll swivel about 350 degrees and the swing. In other words, if you swing this all the way out it'll swing all the way, 180 degrees also. And then when you're ready to travel and you don't want the TV hanging out you just push it all the way in. And once you get it in there, you can see there's a lock that pin to lock it into place and keep it from moving. It is a nice compact design.

It'll save the space and it is a very simple installation. You can mount your TV on here. It offers to visa compliant, mounting patterns and the included hardware to install it in a work with a TV that has a 75 millimeter by 75 millimeter pattern or a hundred millimeter by a hundred millimeter pattern as part is made in the USA has a nice black powder coat finish on it to protect it from any corrosion, a few specs on this the overall dimensions when it's fully retracted like it is right now, overall width is 10 and a half inches wide overall height from the pin all the way up to here is about nine inches tall. And then the depth retracted is about three and a half inches deep. Now, fully extended, you'll still have the same 10 and a half wide, nine inches tall, but when you extend it out that 18 inches it would be 21 and a half inches deep then not just the TV mounting plate itself.

That's gonna be six inches wide by about five and a quarter inches tall. And the maximum load capacity on this mount is 25 pounds. But again, just to show you, if you pull down on this pin and I'll release it, and then you can swing this out and swing your TV, whichever direction you need and it will even extend out like that. So for a little compact design mount it does give you a wide range of capabilities there. And then when it's all done, you just push it all the way in and it'll lock it into place you're ready to travel, but that should do it for the review on the more Full Motion TV Wall Mount..


Info for this part was:

Employee Jeff D
Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.