bing tracking image

Review of MORryde RV TV Mount - Wall Mount - MR28ZR

content loading

Customers compare MR28ZR to these similar products




Products Featured in this Video



MORryde RV TV Mount - Wall Mount - MR28ZR Review


Hey everybody, I'm Ellen here at etrailer.com and we're taking a quick look at the MORryde Fixed TV Wall Mount. This is gonna be a way to mount your TV in your RV to the wall. Give it a nice sturdy spot to make sure that it's not gonna have any issues with falling. It does have a max load capacity of 50 pounds. So as long as your TV is less than that, should be good fit for you. It's gonna be pretty simple to be put on the wall.

You're gonna have this piece that actually gets mounted up to the wall, and then this flat piece that goes onto your TV. As you can see, there's all kinds of predrilled holes in this bracket. So, no matter what kind of bolt pattern your TV has on the back, this should be able to fit it. So, lets take a little closer look. This is a VESA mount.

So it will work again, with all kinds of different mounting patterns. It's got three different compliant mounting patterns and a whole mess of hardware to get you installed. So, again, no matter what you're working with, you should be able to find something, to match with your TV. But, again, basically once you have this plate mounted up, on the TV, this is just gonna go over the top. So I'm just threading these bolts out.

So I can show you basically, how that works. So these two bolts, and then one at the bottom. Take those out. So, this is mounted to your wall. This narrow piece.

You mount this guy to your TV. And then once it's all in place, you just take this on your TV, the whole thing and kind of rotate it on top of that mount. And it should stay there just fine. And then you can secure it with that hardware that you just saw me remove. So we'll have two bolts on either side and then one bolt on the bottom. So, you should be able to have access to kinda get to those bolts behind the TV and underneath to get that installed. It just takes a Phillips head screwdriver to get those in place. And that's pretty much all there is to it. I will give you a couple measurements, so you can get an idea of how big this plate is. So for the TV bracket, its about eight and 7/8th inches wide. And then, about 11 and an 1/8th inch tall. The depth, find a good spot here, is about 7/8ths inches. And then our wall bracket is about two and a quarter. And about 11 and quarter inch tall. And right about an inch deep. I know it's hard for you to see any of those measures, on my tape measure on any of those. So, I hope that gives you an idea, I won't give you all the distances between all these mounting holes just 'cause there's so many. So, I don't wanna take up too much of your time going over all that. But I think between what you got, as far as the pre drilled holes, definitely should be able to fit something in there, for just about any kind of TV or wall that you might have. That's pretty much it for our quick look at the MORryde Fixed TV Wall Mount. I hope this video's been helpful in deciding if this is the right choice for you. We do have a lot of other accessories for your RVs here at etrailer.com, so be sure to check them out. And thanks for watching..


Info for this part was:

Employee Kathleen M
Installed by:
Kathleen M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.