bing tracking image

Review of Maxxair RV Vents and Fans - Roof Vent - MA76JR

content loading

Customers compare MA76JR to these similar products

Products Featured in this Video

Maxxair RV Vents and Fans - Roof Vent - MA76JR Review

Hello everybody, this is Jeff at Today, we're gonna take a look at the MaxxAir II RV and Trailer Roof Vent Cover with the EZClip installation, and this one's in a white color. Now, this roof vent cover is for your RV or your camper, it enables you to open the vent and operate the fan in any weather. It will allow the air to circulate at all times, even when you're away or sleeping, and it also helps keep the rainwater from entering or damaging your RV interior, and it does prevent heat buildup. If you notice on the back of the vent right here, it has this large vented area on the back to cover maximized air flow. They use angled louvers to allow smoke, odors, and stale air to escape, and the side vents right over here, they will create a nice cross-ventilation.

This is twice the size of the vent area on your standard covers. And if you look, I've attached those, just to give you an idea, they use these EZClip pins and they make it very simple to open or remove the cover for your roof vent maintenance. There's no tools needed. just to zoom in to show you we're talking about. And you can see, this is the part that will attach, does come with the mounting hardware to attach this, and then they use these pins to attach the cover to those clips.

So basically to open it, you just pull the pin out of the cover, and then you could raise the cover up. Lots of times, people take two out and then use the other side of the hinge and just lift it up to one side if they want to access it, otherwise you can take all four pins out, there's two on each side. And then to close it, all you do is slide the pins into the cover and line it with those clips and then push it all the way through and then push the clip up and it'll lock it in place. So very easy installation and removal. Now this is designed to fit 2015 and newer MaxxFan and MaxxFan Plus roof vents with the mounting tabs.

And this is compatible with high powered, low speed fans, including the MaxxFan vents and certain MaxxFan Plus vents. The cover itself is made of a durable high-density polyethylene, it is UV resistant. You can see it is a nice sleek aerodynamic design to reduce wind resistance. And it is a very simple installation over the roof vent, no need to drill into the roof of your RV or trailer. There's no drilling required for installation on the MaxxFan and MaxxFan Plus roof vents.

Mounts on the roof vent with the included hardware and here's the hardware to mount those clips. Is a nice white color, it is made in the USA. Specs, again, the application, this is designed to fit over most standard 14 inch by 14 inch roof vents. And it is designed specifically to fit the 2015 and newer MaxxFan and MaxxFan Plus roof vents with the mounting tabs. And it can be used with high power, low speed, three or four speed fans. It does come with some nice instructions to show you how it all installs. And the last thing we'll to do is just give you some overall dimensions. So if we do the overall height, this is the highest point. So if we go, let's go ahead and put our flat ruler up here, and then if we put our tape measure on it, you can see the overall height is about 9 3/4 inches tall, and then to get you the length and the width, what I'm gonna do is go ahead and flip it over. And if we do the length, overall length is right at 22 inches long, overall width, 17 1/2 inches wide. And again, you can see the angled louvers on the back. But that should do it for the review on this MaxxAir II RV and trailer roof vent cover with the EZClip installation in the white color..

Info for this part was:

Employee Jeff D
Installed by:
Jeff D

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.