Customers compare OPT88FR to these similar products
Products Featured in this Video
Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this red identification light bar. This is a 15 1/2 inch long, 1 1/4 inch tall, and 5/8 of an inch thick trailer light that can be mounted to the surface of your trailer. Right at the center rear-side for your trailers that are 80 inches wide or wider. This will act as your identification light bar. So your red diodes… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Yes, because it is a 3-wire light, you can wire the Red Identification Light Bar with White LED Utility Light #OPT88FR to function as rear marker and reverse lights.
view full answer...Opti-Brite LED Dome Light #ILL06COB will put out 643 raw lumens and 354 effective lumens, which equates to about a 40 watt incandescent light bulb. Depending on what you currently have, it most likely is more effective as it is one of the higher…
view full answer...Since your trailer uses a combined wiring system where the stop and turn signals run on the same circuit, in order to add a third brake light to your trailer you would need to use a 2-Wire to 3-Wire Converter, like part #118158. This will convert the…
view full answer...The best route for having brake lights, turn signals, and running lights on your trailer with an Australian 7-way is to use the Vehicle to Vehicle Tail Light Converter #118158. With this system, this will split up the wiring signals for your brake…
view full answer...There is one option, though there isn't an exact chrome bezel made for the Peterson Piranha LED Clearance and Side Marker Trailer Light with Turn Signals #M353R (Red Lens) or #M353A (Amber Lens). The Chrome Bezel #A48CB is designed to fit 6"…
view full answer...We do indeed have some LED taillights that'd work great on your boat trailer. I'd recommend #STL57RB for the driver side and #STL56RB for the passenger side. These lamps measure 6-1/16 x 2-5/8 inches, and would work well on your trailer. As…
view full answer...I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…
view full answer...There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…
view full answer...If you don't have a need for a license plate on your boat trailer then there's no reason you can't use the Optronics LED Trailer Light - Passenger Side #STL56RB (which doesn't include the license plate light) on both sides of the…
view full answer...The connection point on the 2009 Ford E-250 is not exactly located under the dash. It is behind the dash on the passenger side of the vehicle. You have to remove an access panel to get to it per the isntructions, linked for reference. What the…
view full answer...I would recommend to use the treated torx screws for ACQ (Alkaline Copper Quaternary) treated wood for better corrosion and rust resistance. The treated torx screws like the Redline 2-1/2 Inch Long Torx Trailer Screw for ACQ Treated Wood, part…
view full answer...The MCL-83 measures 17 inches long overall and 1-1/2 inches deep. It draws 0.141 amps at 12.8 volts. Light MCL-93, #MCL93RB, is 16-1/2 inches long overall and 1-5/8 inches deep. It draws 0.051 amps at 12.8 volts. Both are LED lights just with…
view full answer...