bing tracking image

Review of Optronics Trailer Lights - Tail Lights - OPT34WR

content loading

Customers compare OPT34WR to these similar products

Products Featured in this Video

Optronics Trailer Lights - Tail Lights - OPT34WR Review

Hello everybody, this is Jeff at Today we're gonna take a look at this low profile passenger side 7-function combination trailer tail light. Now this is a low profile trailer light that'll serve seven functions. Let me just assume in, now I do have this hooked up to some 12 volt power. So we're gonna go ahead and turn it on, and I just to show you it'll serve as a tail light. It'll serve as a stoplight, and see how it gets brighter.

And it'll also serve as a turn signal light. And if you notice on the side here, it has a side marker light. Right here it gives you the rear clearance and rear reflex reflector. And then on the side here gives you the side reflex reflector. So total of seven function.

Now the built-in reflex reflectors will remove the need for separate reflectors on your trailer. This is a nice sealed waterproof construction that is submersible. They do use durable surface mount technology, construction of the led circuit board. This'll let you better withstand shock and vibration allows for improved heat distribution. Now it does use eight LEDs, in other words, one, two, three, four, five, six, seven, and then one on the side for eight.

This will make great replacements for incandescent lights. The LEDs last 50 times longer, they are more efficient, provide better light with less power output. And of course no bulbs to replace or brittle filaments to break. And they do give you a lifetime warranty on the LEDs. You can see it as a nice molded plastic housing, uses durable acrylic lens on it, does have a red lens over white LEDs.

This is compatible with 12 volt DC systems. It is a stub mount, you can see the two studs right here in the back, and it does include the hardware to install it. It is a 3-wire pigtail, white wire's your ground, your brown is your tail light, and the yellow is for the stop and turn. Again, this is for the passenger side, we do also offer the driver's side, that's sold separate on our website, and it's listed on this product page as a related product. It is part number OPT94WR. I wanna give you a few dimensions on this, we're gonna measure the width of it, and it's gonna go from this end all the way over to that side. So it's at five and 7/8 inches wide, tallest point is five and a half inches tall, total depth of it is only one and a quarter inches deep. The distance between the two mounting stud center to center is two inches. Now the power draw on this at 12 volts or stoplight is 0.19 amps for the taillight 0.09 amps. Now, what I'm gonna do is go ahead and turn off the overhead lights. And we're gonna show you again the different functions. There's the tail light, there's the brakes, and see how the brakes are brighter. And then when you hit your turn signals, that would be your turn signal lights. And over here is your side marker light right here. And I'll go ahead and turn back over. And then the reflectors you can see right here, the rear clearance and rear reflex reflector. And then on the side right here is the side reflex reflectors, and turn off our power. But that should do it for the review on the low-profile passenger side, 7-function LED combination trailer tail light..

Info for this part was:

Employee Jeff D
Installed by:
Jeff D

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.