bing tracking image

Review of Optronics Trailer Lights - Tail Lights - OPT94WR

content loading

Customers compare OPT94WR to these similar products




Products Featured in this Video



Optronics Trailer Lights - Tail Lights - OPT94WR Review


Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this Low Profile Driver's Side 8 Function LED Combination Trailer Tail Light. Now, this is a low profile trailer light that'll serve seven functions. What I'm gonna do is we're going to zoom in here, and I do have this hooked up to some 12 volt power, so what I'm gonna do is go ahead and turn that on and go through these functions. Basically, right there, you can see it's gonna give you the tail light function. When you do hit the brakes, you can see it'll get brighter and give you the stop light function, and then when you do hit the turn signals, it'll give you the turn signal function.

And then if you look to the side right here, gives you the side marker light, and since this is the driver's side, you'll notice at the very bottom, it has the license plate light for lighting up your license plate. Now, this one does also offer right here the rear clearance and rear reflex reflector, and it also offers the side reflex reflector, so basically, a total of eight different functions. Now, the built-in reflex reflectors that I've just shown you, this removes the need for a separate reflector on your trailer. This light is a sealed waterproof construction that is submersible, it does use durable SMT technology, which is surface-mount technology construction of the LED circuit board, and that'll allow better withstand shock and vibration, allows to improved heat distribution. This does use 11 LEDs that'll make great replacements for the incandescent lights.

If you notice there's 1, 2, 3, 4, 5, 6, 7, 8, and then at the bottom, there's three, so that's a total of 11 LEDs. Now, the LEDs will last 50 times longer, they are more efficient, provide better light with less power output, and of course, there's no bulbs to replace, no brittle filaments to break, and there is lifetime warranty on the LEDs. This is a nice molded plastic housing, has a nice durable acrylic lens on it, and it is a red lens over wide LEDs. This is compatible with 12 volt DC systems. On the very back here, it is a stud mount design, you can see the two studs with the nuts on it, includes the hardware to install it.

It is a three wire pigtail connection, has a white wire, which is your ground, a brown, which is your tail lights, and then the yellow wire, which is the stop and turn lights. Again, this is the driver's side configuration, we do also offer the passenger's side, it's part number OPT34WR, and it is listed on this product page as a related product. Dimension on this light, the width of it, one side to the other is 5 7/8 inches wide, overall height, bottom to the top, 5 1/2 inches tall, and the depth of it is only 1 1/4 inches deep. The distance between the stud or the mounting studs right here, center to center, is two inches. Power draw at 12 volts for the stop light is 0.19 amps, for the tail light is 0.09 amps.

So what I wanna do now is we're gonna go ahead and turn off the overhead lights, I'm gonna show you those functions again, but show it to you in the dark to show you how bright it is. So right now you've got your tail light function, hit the brakes, there's your stop light function, and then when you hit the turn signals, you can see there's your turn signal function, and again, over here, right here is your side marker light, very bottom is your clear license plate light, and then we mentioned, right here is your rear clearance and rear reflex reflector, and over on the side is your side reflex reflector. But that should do it for the review on this Low Profile Driver's Side 8 Function LED Combination Trailer Tail Light..


Info for this part was:

Employee Jeff D
Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.