bing tracking image

Review of Pacer Performance Cab Lights - Exterior - PP55VR

content loading

Customers compare PP55VR to these similar products




Products Featured in this Video



Pacer Performance Cab Lights - Exterior - PP55VR Review


Hello everybody this is Jeff at etrailer.com. Today we'll take a look at the Pacer Performance three piece LED cab roof light kit for the Chevrolet and GMC trucks. Now this is a custom fit part, it is designed to fit the 2015 to 2019 Chevrolet Silverado and the GMC Sierra twenty five hundred and thirty five hundred trucks. And on a custom fit part like this, I like to recommend for you to go to our website, use the fit guide, put in your year and model vehicle and it'll show if this'll work for your application. Now these lights are designed to look like the factory lights on your Chevrolet and GMC trucks. These are LED roof lights that'll make your vehicle more visible to traffic and the LEDs will make great replacements for the incandescent lights because they do last about 50 times longer, they're more efficient, which will provide brighter light with less power output, and of course there's no bulbs that you have to replace or brittle filaments that'll break.

The custom fit installs on the roof of your vehicle. The light bases themselves are designed to conform and seal the flat or curved surfaces. And if you notice the lenses on these lights, they are a smoked lens and it covers the bright long lasting amber LED lights. Now at the end of this video, I am going to hook these up to some power to show you the lights on it. Now this set will include everything laid out here on the table.

It includes this LED center cluster light, the two LED clearance side lights, the four washers, the wiring harness with the inline fuse and the on and off switch, the six quick splice connectors, and a nice set of instructions that'll describe how these all go together. Now, what is nice is this toggle switch. You can install this on the inside of your cab, it makes it very easy to control the lights from the inside. Now these parts do meet the SAE specifications, few dimensions, and then we're going to hook it up. The cluster light right here, total length on it, if we take a tape measure, it's going to be right at 16 inches long.

Total width on the cluster light is right about three and a quarter inches wide. And the overall height when it's installed is about one and an eighth inches tall. Now on the smaller lights, the side lights right here, these are going to be about two and a half inches wide, about three and a quarter inches long. And they'll be the same height, about one and one eighth inches tall. So what we're going to do, is there's two wires coming off each light, a black and a red, a ground and a power.

So if we hook up our connectors here and then we go ahead and turn on our 12 volt power, you can see the amber lights light up. I'm going to go ahead and turn off the overhead lights. And you can basically see there's a total of six LEDs, two on each section there on the cluster lights. And then just to show you what the side lights will look like, we'll go ahead and hook the power up to those. And there you go with the power hooked up there and those includes two LEDs on the side lights. So you have the two side lights on each end and then the cluster light in the middle. Go ahead and turn back on our overhead lights. But that should do it for the review on this Pacer Performance three piece LED cab roof light kit for the Chevrolet and GMC trucks..


Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Jacob T
Video Edited:
Jacob T
Employee Jonathan Y
Video by:
Jonathan Y
Employee Bradley B
Test Fit:
Bradley B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.