bing tracking image

Review of Performance Tool Hand Tools - 8.8mm Drill Bit and 10 x 1.25 Tap - PTW8618

content loading

Performance Tool Hand Tools - 8.8mm Drill Bit and 10 x 1.25 Tap - PTW8618 Review


Today, we'll be taking a quick look at the 10 millimeter by 125 tap and eight millimeter drill bit sets. This is going to allow you to create a new whole, and then tap that out so that you could make a new threaded hole for your hardware to fit into whether you're trying to install a hitch on your vehicle or retrofit something to work for an accessory, or whatever the case might be. These are going to match together, so if we need to drill a new hole and then tap it out, we can do that and we'll know that those threads will match our hardware.It's a 10 millimeter by 1.25 threaded bolt. Our drill bit is an 8.8 millimeter that is printed on the base of the drill bit to remind us what size it is. And then our tap also has a stamped measurement on it as well. Again, so we can know, remember what each one is, if we're putting them in a set.

These we use for a lot of different applications. That tap can help you to clean out the threads again, if your weld nuts have gotten rusted up on your hitch or on the underside of the vehicle and you need to get that hardware threaded in, we can clean that out. Whenever you're doing that though, you want to use hand tools so that you don't cross thread the weld nut threads on the inside of your frame.And of course you always want to use caution whenever you're using these tools and always wear eye protection. And that's going to do it for our look at the 10 millimeter by 125 tap and 8.8 millimeter drill bit set..


Questions and Comments about this Video