Review of the Pop and Lock Valet Conversion Kit for Tailgate Locks Video

Since you have a 2 inch lift in the rear of your 2005 Toyota Tacoma you would also need the spacer kit part #AL52420 with the Air Lift Load Lifter 5000 kit part #AL49DQ that fits your truck.

You do not need to replace the handle on your 2014 Honda Ridgeline to install the Pop and Lock #PAL6100. This will not interfere with your existing back up camera, it will install on the on the interior side of your existing tailgate handle system.…

Yes, the Pop and Lock Locking Tailgate handles part #PAL8600 and #PAL6101 will lock both ways for the handle of your 2010 Honda Ridgeline. I attached an install video for you to check out as well.

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hi Mitch; thank you for providing that information. The cover you have now is the Pace Edwards JackRabbit #311-JRT3554. The correct replacement cover is the #PE39AJ.

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…